Fresas de precisión,Herramientas de corte para el mecanizado CNC de todos los materiales
El 60 molino de chaflán de grados is a solid carbide straight flute cutter supplied in a standard 3-flute configuration.
The standard dimensions listed below cover cutter diameter, longitud de la flauta, diámetro del vástago, y longitud total. Este 60 fresa de chaflán de grado series provides standard sizes from 3 mm a 12 milímetro, while OMIST can also evaluate non-standard dimensions based on customer drawings.
Opciones de especificación
The standard series uses a 3-flute straight flute configuration. All dimensions below are in millimeters.
| Diámetro del cortador | Longitud de la flauta | Diámetro del vástago | Longitud total | Ángulo |
|---|---|---|---|---|
| 3 milímetro | 8 milímetro | 3 milímetro | 50 milímetro | 60° |
| 4 milímetro | 10 milímetro | 4 milímetro | 50 milímetro | 60° |
| 5 milímetro | 12 milímetro | 5 milímetro | 50 milímetro | 60° |
| 6 milímetro | 15 milímetro | 6 milímetro | 50 milímetro | 60° |
| 7 milímetro | 16 milímetro | 7 milímetro | 60 milímetro | 60° |
| 8 milímetro | 17 milímetro | 8 milímetro | 60 milímetro | 60° |
| 9 milímetro | 19 milímetro | 9 milímetro | 75 milímetro | 60° |
| 10 milímetro | 20 milímetro | 10 milímetro | 75 milímetro | 60° |
| 12 milímetro | 25 milímetro | 12 milímetro | 75 milímetro | 60° |
Aplicaciones y Selección
biselado, Deburring and Edge Finishing
This series is suitable for chamfering, desbarbado, and edge finishing on cast iron, aleación de aluminio, y acero inoxidable. The available sizes allow buyers to select a solid carbide chamfer cutter according to the required tool diameter, alcanzar, y material de la pieza de trabajo.
For other workpiece materials or special machining conditions, please confirm suitability before tool selection.
Select a Standard Size or Request Custom Dimensions
Select the cutter diameter, longitud de la flauta, diámetro del vástago, and overall length from the specification table above.
Sin embargo, if the listed dimensions do not match the required application, send the required dimensions or a tool drawing for evaluation.
Not sure which chamfer angle matches your requirement? Vea nuestro 60 vs 90 vs 120 Degree Chamfer Mills comparison guide before selecting a product series.
Características clave
Construcción de carburo sólido
OMIST manufactures all standard tools in this series from solid carbide.
Straight Flute Design
All standard tools in this series use a straight flute design. This confirmed flute geometry is used throughout the standard Ø3–Ø12 mm series, allowing buyers to match the same cutter design across different tool diameters and lengths.
Standard 3-Flute Configuration
All standard sizes listed on this page use a 3-flute configuration. OMIST can review other flute configurations for non-standard requirements.
Costumbre 60 Degree Chamfer Mill Manufacturing
In addition to the listed standard sizes, OMIST can evaluate costumbre 60 molino de chaflán de grados requirements based on customer drawings and application information.
OMIST confirms final tool dimensions and configurations after technical review.
Custom Tools from Customer Drawings
Send an existing tool drawing, dimensional sketch, or required dimensions for evaluation. Please include the required angle and other dimensional requirements in the drawing or inquiry.
Information Needed for a Quote
Please provide:
- Required angle
- Required dimensions: diámetro del cortador, longitud de la flauta, diámetro del vástago, y longitud total
- Material de la pieza de trabajo
- Cantidad requerida
- Tool drawing or dimensional sketch, si está disponible
- Any special application requirements
Preguntas más frecuentes
¿Qué es un 60 degree chamfer mill used for?
Un 60 degree chamfer mill is used for chamfering, desbarbado, and edge finishing where a 60° cutter is required. Buyers may also encounter the broader term 60 fresa de grado, but this page specifically covers a solid carbide straight flute chamfer cutter series.
What standard sizes are available for the 60 molino de chaflán de grados?
The standard 3-flute series covers cutter diameters from 3 mm a 12 milímetro, with flute lengths from 8 mm a 25 milímetro and overall lengths of 50 milímetro, 60 milímetro, o 75 milímetro.
What materials can this 60 degree chamfer cutter machine?
The current product specification lists hierro fundido, aleación de aluminio, y acero inoxidable as applicable workpiece materials. For other materials, please send the application details to OMIST for evaluation.
Can you manufacture a custom 60 degree chamfer mill from a drawing?
Sí. OMIST can evaluate non-standard chamfer cutter requirements according to customer drawings and application information. OMIST confirms final specifications after technical review.
Productos relacionados
If another included cutter angle is required, también puedes revisar nuestro 30 Degree Chamfer Mill, 90 Degree Chamfer Mill, 100 Degree Chamfer Mill, 120 Degree Chamfer Mill, y 150 Degree Chamfer Mill product options.
For more available chamfer cutter options, browse the complete Molinos de chaflán range.
Request a Quote for a 60 Degree Chamfer Mill
Send your standard size requirement or custom tool drawing to sales@cutterbest.com for quotation review.
OMIST will review the confirmed tooling requirement and provide a quotation.