Carbure solide 2 Fraise à flûte pour l'usinage CNC

Un carbure monobloc 2 flute end mill uses two cutting edges and wide flute grooves to provide more space for chip evacuation. This design makes it suitable for CNC operations that generate a high chip volume, especially slotting, fraisage de poche, fraisage latéral, and light roughing in aluminum and other non-ferrous materials.

The cutter can also machine copper, laiton, plastiques sélectionnés, and other materials when the cutting geometry matches the application. Sharp cutting edges and suitable flute surfaces help reduce chip packing, re-cutting, and built-up edge under stable machining conditions.

OMIST supplies both standard and custom two-flute cutters for machine shops, distributeurs, marques d'outils, fabricants d'équipements, et acheteurs industriels. Available options include different diameters, longueurs de flûte, longueurs hors tout, tailles de tige, angles d'hélice, revêtements, center-cutting designs, tolérances, markings, et emballage.

Principales fonctionnalités

Évacuation efficace des copeaux

The two-flute design provides wider flute grooves than many higher-flute-count tools. Donc, chips can leave the cutting area more easily during slotting and pocket milling.

Efficient chip evacuation helps reduce:

• Emballage de copeaux
• Recoupe de copeaux
• Accumulation de chaleur
• Bord accumulé
• Des dégâts de pointe
• Unstable slot machining

This advantage is especially important when cutting aluminum and other materials that produce large or continuous chips.

For a detailed explanation of flute space, diamètre du noyau, angle d'hélice, et longueur de flûte, lisez notre guide de conception et de sélection des flûtes de fraises en bout.

Solid Carbide and Sharp Cutting Geometry

Solid carbide provides rigidity, résistance à l'usure, and dimensional stability for CNC milling. Entre-temps, sharp cutting edges support clean chip formation in aluminum, cuivre, laiton, and selected plastics.

Selon l'application, the cutter can be supplied with:

• Standard ground flutes
• Surfaces de flûtes lisses ou polies
• Sharp edge preparation
• Application-specific helix angles
• Uncoated or low-friction coating options
• Custom end geometry

Tool performance also depends on cutter diameter, longueur de flûte, porte-à-faux de l'outil, précision du support, rigidité de la machine, livraison de liquide de refroidissement, et paramètres de coupe.

Center-Cutting and Custom Geometry Options

Center-cutting and non-center-cutting options are available according to the machining operation.

A center-cutting design may be required for:

• Controlled plunge entry
• Rampe
• Entrée hélicoïdale
• Pocket starting
• Other axial-entry operations

Cependant, flute count alone does not confirm plunge capability. The end geometry and programmed entry method must suit the cutter.

Pour plus d'informations, lire un 2 fraise à cannelure plongeante.

Custom geometry is also available for application-specific requirements, including special end profiles, préparation des bords, angles d'hélice, portée de l'outil, et tolérances dimensionnelles.

Prise en charge OEM et marques privées

OMIST supports OEM orders for distributors, marques d'outils de coupe, machining companies, et acheteurs industriels.

Available services include:

• Customer logo marking
• Numéros de modèle du client
• Neutral marking
• Emballage neutre
• Emballage de marque privée
• Individual protective packaging
• Specification records for repeat orders

Marking and packaging requirements are confirmed before production.

2 Flute End Mill Materials and CNC Applications

Aluminium et matériaux non ferreux

UN 2 flute end mill is commonly used for aluminum because the wide flute space helps remove large chips from slots and pockets.

Pour l'usinage de l'aluminium, available tool options include:

• Arêtes de coupe tranchantes
• Surfaces de flûtes lisses ou polies
• Uncoated geometry
• Revêtement DLC
• Other suitable low-friction coating options
• Application-specific helix angles

The final choice should match the aluminum grade, diamètre de coupe, profondeur de coupe, méthode de refroidissement, et finition de surface requise.

Cuivre et Laiton

Copper and brass require sharp cutting geometry and stable chip formation. Suitable flute finish and edge preparation can help improve burr control, évacuation des copeaux, et qualité de surface.

Because pure copper and different brass alloys machine differently, customers should provide the exact material grade when available.

Plastiques et matériaux composites sélectionnés

Plastic machining requires geometry that limits rubbing, melting, and chip clogging.

The correct cutter depends on:

• Type de plastique
• Filled or unfilled material
• Required edge quality
• Température de coupe
• Chip form
• Part rigidity

Selected composite materials can also be supplied with application-specific geometry. Cependant, one general two-flute design does not suit every composite material.

Rainurage, Poche, and Side Milling

Slotting and pocket milling create demanding chip-removal conditions. Donc, espace flûte, porte-à-faux de l'outil, longueur de flûte, and coolant or air delivery are important.

The cutter should match:

• Slot or pocket depth
• Radial and axial engagement
• Entry method
• Rigidité des machines
• Required bottom and wall finish

During side milling and profiling, radial engagement and surface-finish requirements become more important. Some applications suit a two-flute cutter, while others may require a higher flute count or stronger core.

For related guidance, lire 2 fraise à flûte vs 4 flûte for a direct comparison, revoir 2, 4, et 6 fraises à cannelure for broader flute-count selection, or explore more 2 applications de fraises à cannelures by material and machining operation.

2 Flute End Mill Specification Options

Nom du produit: 2 Fraise en bout de cannelure

Type d'outil: Fraise en carbure monobloc / Fraise CNC

Matériau de l'outil: Carbure solide; Carbide Grade Selected by Application

Nombre de flûtes: 2 Flûtes

Diamètre de coupe: Standard Metric, Pouce, or Custom Diameter

Longueur de la flûte: Standard, Court, Long, or Drawing-Specified Flute Length

Longueur totale: Longueur totale standard ou personnalisée

Diamètre de la tige: Standard, Renforcé, Réduit, or Custom Shank Diameter

Angle d'hélice: 30°, 35°, 45°, or Application-Specific Design

Fin du profil: Plat / Square End or Custom End Geometry

Coupe centrale: Center-Cutting or Non-Center-Cutting Design

Revêtement: Non couché, Contenu téléchargeable, Nano Bleu, ou revêtement spécifique à l'application

Matériaux de la pièce à usiner: Aluminium, Cuivre, Laiton, Selected Plastics, and Other Confirmed Materials

Applications CNC: Rainurage, Poche, Fraisage latéral, Profilage, Light Roughing, Rampe, or Application-Specific Milling

Tolérance: Standard Production Tolerance or Drawing-Specified Tolerance After Confirmation

Edge Preparation: Pointu, Affûté, or Application-Specific Edge Preparation

Service personnalisé: Dessin, Échantillon, Modèle, or Application-Based Production

Marquage: Marquage standard, Logo client, Numéro de modèle, or Neutral Marking

Conditionnement: Emballage de protection individuel, Carton d'exportation, Neutral Packaging, or Private-Label Packaging

Special specifications are confirmed according to the cutter diameter, longueur, géométrie, revêtement, tolérance, quantité, et application d'usinage.

Coutume 2 Flute End Mill and OEM Service

Standard cutters meet many regular CNC machining requirements. Custom production is available when a project requires non-standard dimensions, special geometry, unusual tool reach, revêtement personnalisé, or drawing-specified tolerance.

Customizable items include:

• Cutter and shank dimensions
• Flute and overall length
• Helix angle and end geometry
• Conception à coupe centrale
• Coating and edge preparation
• Tolérance dimensionnelle
• Marquage laser
• Emballage neutre ou de marque privée

Customers may send a technical drawing, liste des tailles, échantillon d'outil, modèle de référence, image du produit, ou exigence d'usinage. You do not need to provide every parameter before contacting us. OMIST will review the available information and confirm any necessary specifications before quotation.

Selecting a 2 Fraise à flûte pour votre application

Before selecting a cutter, confirm the workpiece material, opération d'usinage, dimensions requises, exigence de revêtement, center-cutting requirement, et la quantité.

Matériau de la pièce

The exact material grade affects flute geometry, préparation des bords, revêtement, et évacuation des copeaux. Par exemple, aluminium, cuivre, laiton, plastiques techniques, and composite materials have different cutting characteristics.

Opération d'usinage

The tool design may change according to whether the operation involves:

• Fentes pleine largeur
• Fraisage de poche
• Fraisage latéral
• Profilage
• Ebauche légère
• Rampe
• Entrée hélicoïdale
• Controlled plunging

Slotting usually requires more flute space, while side milling and finishing may place greater emphasis on rigidity and surface quality.

Tool Dimensions and Reach

Diamètre de coupe, longueur de flûte, longueur totale, and shank diameter should match the feature and machine setup.

Use the shortest practical flute length and tool overhang. Excessive reach can increase deflection, vibration, and dimensional error.

Coating and Center-Cutting Requirement

Available coating options include uncoated, Contenu téléchargeable, Nano Bleu, and application-specific coatings. The final coating should match the material, température de coupe, méthode de refroidissement, et opération d'usinage.

When the process requires axial entry, also confirm whether the cutter needs center-cutting geometry.

Pourquoi nous choisir

16 Years of Cutting Tool Manufacturing Experience

L'OMIST a 16 années d'expérience dans la fabrication d'outils de coupe. We supply standard and custom CNC milling tools for industrial machining, distribution, and OEM projects.

Standard and Custom Production

Customers can source regular two-flute cutters and drawing-based custom tools from one supplier.

Avant devis, we review the available material, opération, dimensions, revêtement, center-cutting requirement, tolérance, et la quantité.

OEM and Specification Confirmation

Nous prenons en charge les numéros de modèle des clients, marquage laser, emballage neutre, et emballages de marque privée.

Avant la production, the main dimensions, géométrie, revêtement, tolérance, marquage, conditionnement, quantité, and delivery requirements are confirmed according to the order.

Repeat-Order Support

Confirmed specifications can be recorded for repeat manufacturing. This helps customers reorder approved models more efficiently and reduces specification errors.

When a repeat order includes any design or packaging changes, please indicate the revised requirement before production.

FAQ

What Information Is Required for a Quotation?

Please send the available information, tel que:

• Cutter size or drawing
• Matériau de la pièce
• Opération d'usinage
• Exigence de revêtement
• Exigence de coupe centrale
• Quantité

A tool sample, image du produit, current model number, or description of the machining problem can also help with evaluation.

Can You Manufacture From a Drawing or Tool Sample?

Oui. OMIST supports production according to technical drawings, listes de tailles, tool samples, reference models, and confirmed machining requirements.

Les dimensions principales, géométrie, revêtement, tolérance, marquage, and packaging will be confirmed before production.

Are Center-Cutting 2 Flute End Mills Available?

Oui. Center-cutting designs are available for ramping, entrée hélicoïdale, démarrage de la poche, and certain controlled plunge operations.

The end geometry and entry method must be confirmed for the specific cutter and application.

Which Coatings Are Available for Aluminum Machining?

Available coating options include uncoated tools, Contenu téléchargeable, Nano Bleu, and other application-specific coatings.

The final coating should match the aluminum grade, géométrie de la fraise, température de coupe, état du liquide de refroidissement, et opération d'usinage.

Do You Provide Inspection or Material Documents?

Material reports, dimensional inspection records, or other quality documents may be available according to the specific tool and order.

Please confirm the required documents before ordering so that their availability can be checked for the project.

Do You Support OEM Marking and Private-Label Packaging?

Oui. We support customer logos, numéros de modèle, neutral marking, individual protective packaging, emballage neutre, et emballages de marque privée.

Please provide the required marking and packaging details before production.

What Are Your MOQ and Lead Time?

There is no single MOQ or lead time for every cutter.

MOQ and lead time depend on:

• Conception standard ou personnalisée
• Tool dimensions
• Géométrie
• Revêtement
• Tolérance
• Quantité
• Calendrier de production actuel

These details will be confirmed in the quotation.

Send Your 2 Flute End Mill Requirement

Looking for a solid carbide 2 flute end mill for standard production, OEM supply, or a custom CNC machining project?

Envoyez-nous votre dessin, liste des tailles, modèle de référence, échantillon d'outil, image du produit, matériau de la pièce à usiner, application d'usinage, et quantité requise lorsqu'elle est disponible. OMIST will review the information, confirm the required specifications, and provide a quotation.

E-mail: sales@cutterbest.com