Fresas de precisión,Herramientas de corte para el mecanizado CNC de todos los materiales
Este 3 flute end mill combines a solid carbide body, a flat cutting end, and three cutting edges. It produces level bottom surfaces, paredes laterales rectas, tragamonedas, bolsillos, pasos, y hombros cuadrados.
The three-flute structure provides chip space for aluminum machining while supporting stable side milling, Perfiles, semiacabado, y terminando. It suits applications that require controlled chip evacuation and clean wall surfaces.
We match the tool dimensions, diseño de borde, revestimiento, and reach to the confirmed machining requirements.
3 Flute End Mill Specification Options
The following dimensions and options are confirmed according to the customer’s drawing, existing cutter, aplicación de mecanizado, y requisitos de pedido.
| Artículo | Available Specification |
|---|---|
| Tool Dimensions | Diámetro de corte, longitud de la flauta, longitud total, and shank diameter according to the confirmed specification |
| Helix and Edge Design | Selected according to slotting, fresado lateral, Perfiles, semiacabado, or finishing requirements |
| Capa / Tratamiento superficial | Selected according to the aluminum grade and cutting conditions |
| Calificación | Standard marking, customer logo, or product code |
| Embalaje | Embalaje estándar de exportación o embalaje personalizado |
| Order Support | Costumbre, OEM, distributor, y pedidos por lotes |
A formal drawing provides the clearest reference. You may also send an existing cutter model, marked sketch, dimension list, or clear product photos.
3 Flute End Mill Specification Options
Recommended Aluminum Machining Operations
Este 3 flute end mill is suitable for:
- fresado lateral
- Profile and contour milling
- Slotting and pocket milling
- Step and square shoulder milling
- Semiacabado
- Acabado
The flat cutting end creates a level bottom and a clear transition between the bottom and side wall. Mientras tanto, the three cutting edges support stable engagement and clean side surfaces.
During slotting and pocket milling, chip control remains important. The cutting depth, trayectoria de herramienta, coolant or air blast, and cutting parameters should allow aluminum chips to leave the cutting area smoothly.
For more information about suitable materials and applications, lee nuestro three-flute cutter application guide.
When to Choose a 2 Molino de extremo de flauta
Elige un 2 flute cutter when deep slotting, desbaste pesado, or maximum chip space is the main requirement.
Elige un 3 flute cutter when cutting stability, side-wall quality, semiacabado, or finishing is more important and chip evacuation remains under control.
For detailed selection guidance, lee nuestro aluminum flute-count comparison guide.
For deep slotting and heavy aluminum roughing, también puedes ver nuestro 2 Molino de extremo de flauta.
Características clave
Flat End Geometry
The flat cutting end produces flat-bottom slots, bolsillos, pasos, y hombros. It also creates straight side walls and clear internal corners.
The edge design should match the cutting depth, trayectoria de herramienta, and required finish because the sharp outer corners carry more cutting pressure than rounded profiles.
Balanced Three-Flute Design
The three-flute structure balances cutting-edge count, rigidez, y espacio para chips.
Compared with many 2 flute cutters, it provides an additional cutting edge for more stable side milling and finishing. Al mismo tiempo, it retains more space for aluminum chips than many higher-flute tools.
Construcción de carburo sólido
The cutter uses solid carbide throughout the cutting section and shank. This construction provides the rigidity and wear resistance required for CNC machining and repeated production work.
Suitable tool holding, low runout, stable clamping, and correct cutting parameters help maintain tool life and dimensional consistency.
Sharp Cutting Edges
Sharp cutting edges help reduce cutting resistance during aluminum machining. They also support clean side walls and a smooth machined surface under suitable cutting conditions.
We select the edge preparation according to the operation. A finishing cutter may require a different edge design from a tool used for slotting or higher material removal.
Fabricación personalizada
Custom Dimensions and Geometry
We manufacture custom tools when a common cutter does not match the part, profundidad de mecanizado, or machine setup.
Available custom options include cutting diameter, longitud de la flauta, longitud total, diámetro del vástago, longitud del cuello, alcance de la herramienta, ángulo de hélice, and edge geometry.
For better stability, use the shortest suitable flute length and overall length whenever possible. For deeper or restricted areas, we can produce a long-reach or special-length design after confirming the application.
Coating and Surface Selection
The suitable coating or surface treatment depends on the aluminum grade, operación de mecanizado, temperatura de corte, condición del refrigerante, chip adhesion, and required tool life.
Send your current tool information and machining conditions when requesting a coating recommendation. We will confirm the available option together with the final tool specification.
OEM Marking and Packaging
We support customer logos, product codes, custom labels, individual tool boxes, and distributor packaging.
Please provide the marking content, logo file, packaging reference, y cantidad. We will confirm the final design before production.
Preguntas frecuentes
es un 3 flute end mill good for aluminum?
Sí. Un 3 flute end mill works well for many aluminum machining operations because it balances chip space, estabilidad de corte, y acabado superficial.
It is commonly used for side milling, fresado de perfiles, semiacabado, refinamiento, and controlled slotting.
es un 2 flauta o 3 fresa de extremo de flauta mejor para aluminio?
Un 2 flute cutter offers more chip space, so it often suits deep slotting and heavy roughing.
Un 3 flute cutter provides another cutting edge, which can improve stability and side-wall quality during profiling and finishing. The better option depends on the cutting depth, trayectoria de herramienta, and chip-control conditions.
Can you manufacture the tool according to a photo or drawing?
Sí. We manufacture custom tools according to drawings, marked sketches, especificaciones de corte existentes, or clear photos.
When sending photos, please also include the main dimensions, material de la pieza de trabajo, operación de mecanizado, y cantidad.
Can you customize the dimensions and coating?
Sí. We support custom dimensions, tamaños de mango, ángulos de hélice, edge designs, revestimientos, markings, y embalaje.
We confirm the final configuration after reviewing the machining application and order requirements.
Request a Quote for a 3 Molino de extremo de flauta
Send us the workpiece material, operación de mecanizado, main tool dimensions, requisito de recubrimiento, cantidad, and any available drawing or current cutter information.
If some details are unavailable, send what you already have. We will confirm the remaining specifications with you.
Email your drawing, tool photos, or requirements to sales@cutterbest.com.
or submit the inquiry form below.