Fraise de précision,Outils de coupe pour l’usinage CNC de chaque matériau
Le 100 degree chamfer mill uses solid carbide construction with straight-flute, 3-flute geometry for machining requirements that specify a 100° included angle.
After confirming the angle, compare the required cutter diameter, diamètre de la tige, and overall length with the listed specifications. If the standard combinations do not match the part or existing tool, the available dimensions or drawing can be reviewed for a non-standard cutter.
100 Degree Chamfer Mill Specification Options
The following specifications represent the currently confirmed size combinations for this product series.
| Diamètre de coupe | Diamètre de la tige | Flûtes | Longueur totale |
|---|---|---|---|
| Ø4 mm | Ø4 mm | 3F | 50 mm |
| Ø6 mm | Ø6 mm | 3F | 50 mm |
| Ø8 mm | Ø8 mm | 3F | 60 mm |
| Ø10 mm | Ø10 mm | 3F | 75 mm |
| Ø12 mm | Ø12 mm | 3F | 75 mm |
Custom Dimensions
If the listed combinations do not fit the requirement, provide the required cutter diameter, diamètre de la tige, longueur totale, and other available dimensional information.
For replacement tools or part-specific requirements, you can also send a tool drawing, part drawing, or dimensional sketch for review.
Candidatures et sélection
When to Select a 100 Fraise à chanfrein à degrés
Choisissez un 100 coupe-chanfrein à degrés when the part drawing or machining requirement specifies a 100° included angle.
Typical operations include:
- Chanfreinage
- Ébavurage
- Edge finishing
The required part geometry should determine the cutter angle. Confirm the angle first, then select the appropriate tool dimensions for the machining setup.
Check the Required Dimensions
Après avoir confirmé l'angle requis, vérifier:
- Diamètre de coupe
- Diamètre de la tige
- Longueur totale
- Espace d'usinage disponible
The selected tool should fit both the required part feature and the machine setup.
If the listed size combinations do not fit, use the required dimensions rather than selecting the nearest standard size without confirmation.
Matériaux de la pièce à usiner
The confirmed product family covers:
- Acier de moule
- Acier trempé
- Aluminium
- Cuivre
- Plastiques
State the workpiece material in the inquiry so it can be reviewed together with the tool dimensions and machining requirement.
Standard or Non-Standard Selection
Use a listed size when the angle and main dimensions match the requirement.
Consider a non-standard tool when the required cutter diameter, diamètre de la tige, longueur totale, or angle falls outside the listed product specification.
Principales fonctionnalités
- Construction en carbure monobloc
- 100° included cutter angle
- Straight-flute geometry
- 3-configuration de flûte
- Listed cutter diameters from Ø4 to Ø12 mm
- Non-standard angle and dimensional requirements can be evaluated
Coutume 100 Fabrication de broyeurs à chanfreins
Non-Standard Angles and Dimensions
This page focuses on the 100 broyeur à chanfrein de degré with a 100° included angle.
For other non-standard straight-flute chamfer cutter requirements, OMIST can evaluate angles from 30° to 160° in 5° increments.
The requested angle and dimensions are reviewed before the final tool specification is confirmed.
Custom Tools from Drawings or Dimensions
Custom evaluation can support replacement tools, existing machining setups, and new part requirements when a listed size does not match.
For a replacement tool, provide the existing tool drawing or measured dimensions where possible.
For a new part, provide the available part drawing, croquis dimensionnel, or required tool dimensions for specification review.
Informations nécessaires pour un devis
Veuillez fournir:
- Angle requis
- Diamètre de coupe
- Diamètre de la tige
- Longueur totale
- Matériau de la pièce
- Quantité requise
- Dessin ou croquis dimensionnel, si disponible
- Other application information relevant to the required tool
Si certaines dimensions ne sont pas encore confirmées, send the available information first for review.
FAQ
Does 100° refer to the included angle of this chamfer mill?
Oui. Confirm the angle reference on the drawing or specification before ordering.
How do I choose the correct size?
First confirm the required angle. Then compare the cutter diameter, diamètre de la tige, and overall length with the listed specifications and available machining space.
If no listed combination matches, send the required dimensions for evaluation.
Can I request another chamfer angle or a non-standard size?
Oui. Non-standard straight-flute chamfer cutter angles from 30° to 160° in 5° increments, as well as non-standard dimensions, can be evaluated.
Do I need a drawing before requesting a quotation?
Non. You can start with the required angle and available dimensions. A tool drawing, part drawing, or dimensional sketch is helpful when the cutter must match an existing tool or specific part feature.
Produits connexes
If your application requires another included cutter angle, vous pouvez également consulter notre 30 Fraise à chanfrein à degrés, 60 Fraise à chanfrein à degrés, 90 Fraise à chanfrein à degrés, 120 Fraise à chanfrein à degrés, et 150 Fraise à chanfrein à degrés options de produits.
For more chamfer cutter options, parcourir l'intégralité Fraises à chanfrein gamme.
Demander un devis pour un 100 Fraise à chanfrein à degrés
For a listed or non-standard 100 broyeur à chanfrein de degré requirement, send the available specification or drawing to sales@cutterbest.com for review and quotation.