150 Fraise à chanfrein à degrés - Fraise en carbure monobloc à 3 cannelures

Le 150 degree chamfer mill is a solid carbide, flûte droite, 3-flute cutter for machining requirements where a 150° chamfer angle is specified.

A 150° chamfer tool should be selected according to more than cutter diameter alone. Avant de commander, check the required angle, diamètre de coupe, diamètre de la tige, longueur totale, espace d'usinage disponible, and part geometry together.

For requirements outside the listed specifications, OMIST can review the required dimensions from a tool drawing, part drawing, croquis dimensionnel, or other available application information.

150 Degree Chamfer Mill Specification Options

The following dimensions represent the currently confirmed product combinations for this 3-flute straight-flute series.

Custom Dimensions

If the listed dimensions do not match the requirement, provide the required cutter diameter, diamètre de la tige, longueur totale, and other available dimensional information.

You can also submit a tool drawing, part drawing, or dimensional sketch when the cutter must match an existing tool or a specific part feature.

Candidatures et sélection

Quand utiliser un 150 Fraise à chanfrein à degrés

Choose this product when the part drawing or confirmed machining requirement specifies a 150° chamfer angle.

Typical operations include chamfering, ébavurage, and edge finishing where the 150° cutter geometry matches the required part feature.

Donc, use the drawing or machining requirement to determine the required angle rather than selecting an angle only because a particular cutter size is available.

Confirm the 150° Requirement Before Ordering

Start by confirming the required angle on the part drawing or machining specification.

After you confirm the 150° requirement, check whether the cutter diameter, diamètre de la tige, and overall length fit the available machining space and toolholding setup.

If the listed dimensions do not match the part geometry, send the available dimensions or drawing for evaluation rather than selecting the nearest size without confirmation.

Matériaux de la pièce à usiner

The confirmed factory information covers:

• Acier de moule
• Acier trempé
• Aluminium
• Cuivre
• Plastiques

Please state the workpiece material when requesting a quotation so it can be reviewed together with the tool dimensions and machining requirement.

Select a Listed Size or Request a Non-Standard Tool

If a listed size matches the requirement, use the specification table to confirm the main dimensions before ordering.

Consider a non-standard tool when the listed combinations do not match the required angle, diamètre de coupe, diamètre de la tige, longueur totale, or available machining space.

Principales fonctionnalités

• Construction en carbure monobloc
• Straight-flute geometry
• 3-configuration de flûte
• Listed cutter diameters from Ø4 to Ø12 mm
• Matching shank diameters for the listed sizes
• Non-standard angle and dimension requests can be evaluated

Coutume 150 Fabrication de broyeurs à chanfreins

Non-Standard Angle and Dimension Requests

For non-standard straight-flute chamfer cutter requirements, OMIST can evaluate angles from 30° to 160° in 5° increments.

OMIST confirms the final angle and dimensional specification according to the customer requirement before production.

This page remains focused on the 150 broyeur à chanfrein de degré. If another angle is required, state the exact angle and dimensions in the inquiry for separate evaluation.

Custom Tools from Drawings or Dimensions

Custom evaluation is useful for replacement tools, existing machining setups, or new parts when the listed dimensions do not match the required chamfer geometry.

For a replacement tool, provide the existing tool drawing or measured dimensions where possible. For a new project, provide a part drawing, croquis dimensionnel, or required tool dimensions so OMIST can review the specification.

OMIST reviews the supplied information before confirming the final tool specification.

Informations nécessaires pour un devis

Veuillez fournir:

• Angle requis
• Diamètre de coupe
• Diamètre de la tige
• Longueur totale
• Matériau de la pièce
• Quantité requise
• Dessin ou croquis dimensionnel, si disponible
• Special machining requirements, le cas échéant

Si certaines dimensions ne sont pas encore confirmées, send the available information first for review.

FAQ

Can I request another chamfer angle or non-standard size?

Oui. Non-standard angle and dimensional requirements can be evaluated according to the requested specification. The final tool specification is confirmed after review.

Do I need a drawing before requesting a quotation?

Non. A drawing is helpful but is not required for the first inquiry. You can send the required angle and available dimensional information first, then provide a drawing or dimensional sketch if available.

What information should I provide for a 150 degree chamfer mill quotation?

Provide the required angle, diamètre de coupe, diamètre de la tige, longueur totale, matériau de la pièce à usiner, et la quantité. A drawing or dimensional sketch is helpful for non-standard requirements.

Can this 150 degree chamfer mill be made to replace an existing tool?

A replacement requirement can be evaluated from the existing tool drawing, croquis dimensionnel, or measured dimensions. OMIST reviews the supplied information before confirming the replacement tool specification.

Produits connexes

Si un autre angle de coupe inclus est requis, vous pouvez également consulter notre 30 Fraise à chanfrein à degrés, 60 Fraise à chanfrein à degrés, 90 Fraise à chanfrein à degrés, 100 Fraise à chanfrein à degrés, et 120 Fraise à chanfrein à degrés options de produits.

Pour plus d’options de fraises à chanfrein disponibles, parcourir l'intégralité Fraises à chanfrein gamme.

Demander un devis pour un 150 Fraise à chanfrein à degrés

For a listed or non-standard 150 degree chamfer mill requirement, send the available specification or drawing to sales@cutterbest.com for review and quotation.