Frese di precisione,Utensili da taglio per la lavorazione CNC di ogni materiale
IL 100 degree chamfer mill uses solid carbide construction with straight-flute, 3-flute geometry for machining requirements that specify a 100° included angle.
After confirming the angle, compare the required cutter diameter, diametro del gambo, and overall length with the listed specifications. If the standard combinations do not match the part or existing tool, the available dimensions or drawing can be reviewed for a non-standard cutter.
100 Degree Chamfer Mill Specification Options
The following specifications represent the currently confirmed size combinations for this product series.
| Diametro taglierina | Diametro del gambo | Flauti | Lunghezza totale |
|---|---|---|---|
| Ø4 mm | Ø4 mm | 3F | 50 millimetro |
| Ø6 mm | Ø6 mm | 3F | 50 millimetro |
| Ø8 mm | Ø8 mm | 3F | 60 millimetro |
| Ø10 mm | Ø10 mm | 3F | 75 millimetro |
| Ø12 mm | Ø12 mm | 3F | 75 millimetro |
Custom Dimensions
If the listed combinations do not fit the requirement, provide the required cutter diameter, diametro del gambo, lunghezza complessiva, and other available dimensional information.
For replacement tools or part-specific requirements, you can also send a tool drawing, part drawing, or dimensional sketch for review.
Candidature e selezione
When to Select a 100 Mulino per smusso di grado
Scegli un 100 taglierina per smusso di grado when the part drawing or machining requirement specifies a 100° included angle.
Typical operations include:
- Smussatura
- Sbavatura
- Edge finishing
The required part geometry should determine the cutter angle. Confirm the angle first, then select the appropriate tool dimensions for the machining setup.
Check the Required Dimensions
Dopo aver confermato l'angolo richiesto, controllo:
- Diametro taglierina
- Diametro del gambo
- Lunghezza
- Spazio di lavorazione disponibile
The selected tool should fit both the required part feature and the machine setup.
If the listed size combinations do not fit, use the required dimensions rather than selecting the nearest standard size without confirmation.
Materiali del pezzo
The confirmed product family covers:
- Stampo in acciaio
- Acciaio temprato
- Alluminio
- Rame
- Plastica
State the workpiece material in the inquiry so it can be reviewed together with the tool dimensions and machining requirement.
Standard or Non-Standard Selection
Use a listed size when the angle and main dimensions match the requirement.
Consider a non-standard tool when the required cutter diameter, diametro del gambo, lunghezza complessiva, or angle falls outside the listed product specification.
Caratteristiche principali
- Solid carbide construction
- 100° included cutter angle
- Straight-flute geometry
- 3-configurazione del flauto
- Listed cutter diameters from Ø4 to Ø12 mm
- Non-standard angle and dimensional requirements can be evaluated
Costume 100 Produzione di frese per smussi di grado
Non-Standard Angles and Dimensions
This page focuses on the 100 fresa per smussatura di grado with a 100° included angle.
For other non-standard straight-flute chamfer cutter requirements, OMIST can evaluate angles from 30° to 160° in 5° increments.
The requested angle and dimensions are reviewed before the final tool specification is confirmed.
Custom Tools from Drawings or Dimensions
Custom evaluation can support replacement tools, existing machining setups, and new part requirements when a listed size does not match.
For a replacement tool, provide the existing tool drawing or measured dimensions where possible.
For a new part, provide the available part drawing, schizzo dimensionale, or required tool dimensions for specification review.
Informazioni necessarie per un preventivo
Si prega di fornire:
- Angolo richiesto
- Diametro taglierina
- Diametro del gambo
- Lunghezza
- Materiale del pezzo
- Quantità richiesta
- Disegno o schizzo dimensionale, se disponibile
- Other application information relevant to the required tool
Se alcune dimensioni non sono ancora confermate, send the available information first for review.
Domande frequenti
Does 100° refer to the included angle of this chamfer mill?
Sì. Confirm the angle reference on the drawing or specification before ordering.
How do I choose the correct size?
First confirm the required angle. Then compare the cutter diameter, diametro del gambo, and overall length with the listed specifications and available machining space.
If no listed combination matches, send the required dimensions for evaluation.
Can I request another chamfer angle or a non-standard size?
Sì. Non-standard straight-flute chamfer cutter angles from 30° to 160° in 5° increments, as well as non-standard dimensions, can be evaluated.
Do I need a drawing before requesting a quotation?
No. You can start with the required angle and available dimensions. A tool drawing, part drawing, or dimensional sketch is helpful when the cutter must match an existing tool or specific part feature.
prodotti correlati
If your application requires another included cutter angle, you can also review our 30 Mulino per smusso di grado, 60 Mulino per smusso di grado, 90 Mulino per smusso di grado, 120 Mulino per smusso di grado, E 150 Mulino per smusso di grado product options.
For more chamfer cutter options, browse the complete Mulini per smusso allineare.
Richiedi un preventivo per a 100 Mulino per smusso di grado
For a listed or non-standard 100 fresa per smussatura di grado requirement, send the available specification or drawing to sales@cutterbest.com for review and quotation.