150 Fresa per smusso a gradi – Fresa in metallo duro integrale a 3 taglienti

IL 150 degree chamfer mill is a solid carbide, flauto dritto, 3-flute cutter for machining requirements where a 150° chamfer angle is specified.

A 150° chamfer tool should be selected according to more than cutter diameter alone. Prima di ordinare, check the required angle, diametro della fresa, diametro del gambo, lunghezza complessiva, available machining space, and part geometry together.

For requirements outside the listed specifications, OMIST can review the required dimensions from a tool drawing, part drawing, schizzo dimensionale, or other available application information.

150 Degree Chamfer Mill Specification Options

The following dimensions represent the currently confirmed product combinations for this 3-flute straight-flute series.

Custom Dimensions

If the listed dimensions do not match the requirement, provide the required cutter diameter, diametro del gambo, lunghezza complessiva, and other available dimensional information.

You can also submit a tool drawing, part drawing, or dimensional sketch when the cutter must match an existing tool or a specific part feature.

Candidature e selezione

When to Use a 150 Mulino per smusso di grado

Choose this product when the part drawing or confirmed machining requirement specifies a 150° chamfer angle.

Typical operations include chamfering, sbavatura, and edge finishing where the 150° cutter geometry matches the required part feature.

Perciò, use the drawing or machining requirement to determine the required angle rather than selecting an angle only because a particular cutter size is available.

Confirm the 150° Requirement Before Ordering

Start by confirming the required angle on the part drawing or machining specification.

After you confirm the 150° requirement, check whether the cutter diameter, diametro del gambo, and overall length fit the available machining space and toolholding setup.

If the listed dimensions do not match the part geometry, send the available dimensions or drawing for evaluation rather than selecting the nearest size without confirmation.

Materiali del pezzo

The confirmed factory information covers:

• Stampo in acciaio
• Acciaio temprato
• Alluminio
• Rame
• Plastica

Please state the workpiece material when requesting a quotation so it can be reviewed together with the tool dimensions and machining requirement.

Select a Listed Size or Request a Non-Standard Tool

If a listed size matches the requirement, use the specification table to confirm the main dimensions before ordering.

Consider a non-standard tool when the listed combinations do not match the required angle, diametro della fresa, diametro del gambo, lunghezza complessiva, or available machining space.

Caratteristiche principali

• Solid carbide construction
• Straight-flute geometry
• 3-configurazione del flauto
• Listed cutter diameters from Ø4 to Ø12 mm
• Matching shank diameters for the listed sizes
• Non-standard angle and dimension requests can be evaluated

Costume 150 Produzione di frese per smussi di grado

Non-Standard Angle and Dimension Requests

For non-standard straight-flute chamfer cutter requirements, OMIST can evaluate angles from 30° to 160° in 5° increments.

OMIST confirms the final angle and dimensional specification according to the customer requirement before production.

This page remains focused on the 150 fresa per smussatura di grado. If another angle is required, state the exact angle and dimensions in the inquiry for separate evaluation.

Custom Tools from Drawings or Dimensions

Custom evaluation is useful for replacement tools, existing machining setups, or new parts when the listed dimensions do not match the required chamfer geometry.

For a replacement tool, provide the existing tool drawing or measured dimensions where possible. For a new project, provide a part drawing, schizzo dimensionale, or required tool dimensions so OMIST can review the specification.

OMIST reviews the supplied information before confirming the final tool specification.

Informazioni necessarie per un preventivo

Si prega di fornire:

• Angolo richiesto
• Diametro taglierina
• Diametro del gambo
• Lunghezza
• Materiale del pezzo
• Quantità richiesta
• Disegno o schizzo dimensionale, se disponibile
• Special machining requirements, if applicable

Se alcune dimensioni non sono ancora confermate, send the available information first for review.

Domande frequenti

Can I request another chamfer angle or non-standard size?

Sì. Non-standard angle and dimensional requirements can be evaluated according to the requested specification. The final tool specification is confirmed after review.

Do I need a drawing before requesting a quotation?

No. A drawing is helpful but is not required for the first inquiry. You can send the required angle and available dimensional information first, then provide a drawing or dimensional sketch if available.

What information should I provide for a 150 degree chamfer mill quotation?

Provide the required angle, diametro della fresa, diametro del gambo, lunghezza complessiva, materiale del pezzo, e quantità. A drawing or dimensional sketch is helpful for non-standard requirements.

Can this 150 degree chamfer mill be made to replace an existing tool?

A replacement requirement can be evaluated from the existing tool drawing, schizzo dimensionale, or measured dimensions. OMIST reviews the supplied information before confirming the replacement tool specification.

prodotti correlati

If another included cutter angle is required, you can also review our 30 Mulino per smusso di grado, 60 Mulino per smusso di grado, 90 Mulino per smusso di grado, 100 Mulino per smusso di grado, E 120 Mulino per smusso di grado product options.

For more available chamfer cutter options, browse the complete Mulini per smusso allineare.

Richiedi un preventivo per a 150 Mulino per smusso di grado

For a listed or non-standard 150 degree chamfer mill requirement, send the available specification or drawing to sales@cutterbest.com for review and quotation.