Frese di precisione,Utensili da taglio per la lavorazione CNC di ogni materiale
A tapered ball nose end mill combines ball-end cutting geometry with a tapered cutting section. Buyers may also use terms such as tapered ball end mill O tapered ball nose milling cutter for this tool type.
The product range includes multiple standard combinations of ball radius, included taper angle, diametro del gambo, lunghezza del flauto, e lunghezza complessiva. Per requisiti non standard, we can review the customer drawing and confirm the applicable geometry before quotation.
Tapered Ball Nose End Mill Specifications
The standard range includes several dimension combinations rather than one fixed size series. Perciò, buyers should consider ball radius, lunghezza del flauto, diametro del gambo, lunghezza complessiva, and included taper angle together when selecting a tool.
The table below lists representative standard configurations.
| Raggio della palla | Lunghezza del flauto | Diametro del gambo | Lunghezza totale |
|---|---|---|---|
| R0.25–R1.0 | 15 millimetro | 4 millimetro | 50 millimetro |
| R0.25–R1.0 | 20.5 millimetro | 4 millimetro | 50 millimetro |
| R0.25–R1.0 | 20 millimetro | 6 millimetro | 50 millimetro |
| R0.25–R2.0 | 30.5 millimetro | 6 millimetro | 75 millimetro |
| R0.5–R2.0 | 47 millimetro | 8 millimetro | 85 millimetro |
| R0.5–R2.0 | 60 millimetro | 8 millimetro | 100 millimetro |
| R2.0 | 70 millimetro | 10 millimetro | 110 millimetro |
These examples do not represent the complete model range. Other standard combinations are also available, and we can manufacture special sizes according to the required tool geometry.
Ball Radius and Included Taper Angle Options
Ball radius and included taper angle are two key dimensions when specifying this tool. The radius defines the rounded cutting tip, while the included taper angle defines the total angle between the two tapered sides.
Ball Radius Options
Standard ball radius options include:
R0.25, R0.5, R0.75, R1.0, R1.5, and R2.0.
The ball diameter equals twice the ball radius. Per esempio, an R0.5 ball end has a 1.0 mm ball diameter, while an R1.0 ball end has a 2.0 mm ball diameter.
If a project requires another radius, we can review it as a custom specification.
Included Taper Angle Options
Standard included taper angles include:
10°, 12°, 15°, 20°, and 30°.
All angle values on this page refer to the included taper angle, not the angle per side. Perciò, il raggio, included angle, lunghezza di taglio, and other dimensions should be considered as one complete tool configuration.
Generale / Steel-Use and Aluminum-Use Series
We offer different product series according to the workpiece and machining requirement.
Generale / Steel-Use Series
The general / steel-use series uses a bronze-colored coating and is typically offered as an HRC55 series.
Confirmed workpiece materials include stainless steel, rame, alluminio, leghe di titanio, plastica, e legno. For other materials, we review the actual machining requirement before confirming the suitable configuration.
Coating color does not identify the coating chemistry by itself. If a customer requires a specific coating type, we review that requirement separately.
Aluminum-Use Series
The aluminum-use series mainly targets aluminum machining and uses a multicolor coating.
Standard radius and included-angle combinations are available for this series. Inoltre, we can review non-standard dimensions and coating requirements according to the application.
Flute and Helix Options
The standard metal-machining configuration uses 2 flauti and a 35° angolo dell'elica.
Customers can also request 3-flute, 4-flauto, or other flute counts. For these non-standard configurations, we confirm the final design and applicable order quantity during quotation.
Applicazioni
Tapered ball nose geometry suits CNC features that require both a rounded cutting tip and a tapered cutting section.
Typical applications include curved profiles, contoured surfaces, tapered profiles, and other CNC features that require ball-end geometry.
The selected ball radius, included taper angle, lunghezza del flauto, and overall dimensions should match the actual part feature.
For other tool geometries, Vedere tapered end mills.
For broader application and selection guidance, Vedere tapered end mill applications and selection.
Custom Tapered Ball Nose End Mill Manufacturing
We manufacture custom tapered ball nose end mills according to customer drawings and machining requirements. Custom options can include special ball radii, included taper angles, extended flute lengths, extended overall lengths, different flute counts, requisiti di rivestimento, and other non-standard dimensions.
Send the available drawing or dimensional requirement for review. We will confirm the applicable tool configuration before quotation.
MOQ varies with the specific custom design, so we confirm it for each quotation.
FAQ About Tapered Ball Nose End Mills
Quali informazioni devo fornire per un preventivo?
Please provide the available drawing or required tool dimensions. Raggio della palla, included taper angle, lunghezza del flauto, diametro del gambo, and overall length are especially useful when available.
Can you produce a non-standard tapered ball nose end mill?
Sì. We can review special radii, angles, lunghezze, conta il flauto, rivestimenti, and other non-standard dimensions according to the drawing and tool design.
Is there a fixed MOQ for custom tools?
NO. MOQ depends on the specific geometry, dimensioni, configurazione del flauto, and other customization requirements. We confirm the applicable quantity with the quotation.
Send Your Tapered Ball Nose End Mill Inquiry
Need a standard or custom tapered ball nose end mill? Send your drawing or machining requirement to my email, O chat with us on Contatti if you prefer. We will review the tool configuration and confirm the applicable specification before quotation.