100 Degree Chamfer Mill

The 100 degree chamfer mill uses solid carbide construction with straight-flute, 3-flute geometry for machining requirements that specify a 100° included angle.

After confirming the angle, compare the required cutter diameter, シャンク径, and overall length with the listed specifications. If the standard combinations do not match the part or existing tool, the available dimensions or drawing can be reviewed for a non-standard cutter.

100 Degree Chamfer Mill Specification Options

The following specifications represent the currently confirmed size combinations for this product series.

カスタムディメンション

If the listed combinations do not fit the requirement, provide the required cutter diameter, シャンク径, 全長, and other available dimensional information.

For replacement tools or part-specific requirements, you can also send a tool drawing, 部品図, or dimensional sketch for review.

Applications and Selection

When to Select a 100 Degree Chamfer Mill

を選択してください 100 degree chamfer cutter when the part drawing or machining requirement specifies a 100° included angle.

Typical operations include:

• Chamfering
• Deburring
• Edge finishing

The required part geometry should determine the cutter angle. Confirm the angle first, then select the appropriate tool dimensions for the machining setup.

Check the Required Dimensions

After confirming the required angle, チェック:

• カッター径
• シャンク径
• 全長
• 加工可能スペース

The selected tool should fit both the required part feature and the machine setup.

If the listed size combinations do not fit, use the required dimensions rather than selecting the nearest standard size without confirmation.

ワーク材質

The confirmed product family covers:

• 金型鋼
• 硬化鋼
• アルミニウム
• 銅
• プラスチック

State the workpiece material in the inquiry so it can be reviewed together with the tool dimensions and machining requirement.

Standard or Non-Standard Selection

Use a listed size when the angle and main dimensions match the requirement.

Consider a non-standard tool when the required cutter diameter, シャンク径, 全長, or angle falls outside the listed product specification.

主な機能

• Solid carbide construction
• 100° included cutter angle
• Straight-flute geometry
• 3-flute configuration
• Listed cutter diameters from Ø4 to Ø12 mm
• Non-standard angle and dimensional requirements can be evaluated

カスタム 100 Degree Chamfer Mill Manufacturing

Non-Standard Angles and Dimensions

This page focuses on the 100 度面取りミル with a 100° included angle.

For other non-standard straight-flute chamfer cutter requirements, OMIST can evaluate angles from 30° to 160° in 5° increments.

The requested angle and dimensions are reviewed before the final tool specification is confirmed.

Custom Tools from Drawings or Dimensions

Custom evaluation can support replacement tools, existing machining setups, and new part requirements when a listed size does not match.

For a replacement tool, provide the existing tool drawing or measured dimensions where possible.

For a new part, provide the available part drawing, dimensional sketch, or required tool dimensions for specification review.

Information Needed for a Quote

Please provide:

• Required angle
• カッター径
• シャンク径
• 全長
• ワーク材質
• 必要数量
• Drawing or dimensional sketch, 利用可能な場合
• Other application information relevant to the required tool

If some dimensions are not yet confirmed, send the available information first for review.

FAQ

Does 100° refer to the included angle of this chamfer mill?

はい. Confirm the angle reference on the drawing or specification before ordering.

How do I choose the correct size?

First confirm the required angle. Then compare the cutter diameter, シャンク径, and overall length with the listed specifications and available machining space.

If no listed combination matches, send the required dimensions for evaluation.

Can I request another chamfer angle or a non-standard size?

はい. Non-standard straight-flute chamfer cutter angles from 30° to 160° in 5° increments, as well as non-standard dimensions, can be evaluated.

Do I need a drawing before requesting a quotation?

いいえ. You can start with the required angle and available dimensions. A tool drawing, 部品図, or dimensional sketch is helpful when the cutter must match an existing tool or specific part feature.

関連製品

If your application requires another included cutter angle, you can also review our 30 Degree Chamfer Mill, 60 Degree Chamfer Mill, 90 Degree Chamfer Mill, 120 Degree Chamfer Mill, そして 150 Degree Chamfer Mill product options.

For more chamfer cutter options, browse the complete 面取りミル 範囲.

見積もりをリクエストする 100 Degree Chamfer Mill

For a listed or non-standard 100 度面取りミル requirement, send the available specification or drawing to sales@cutterbest.com for review and quotation.