150 度面取りミル – 3枚刃超硬ソリッドカッター

The 150 degree chamfer mill is a solid carbide, straight-flute, 3-flute cutter for machining requirements where a 150° chamfer angle is specified.

A 150° chamfer tool should be selected according to more than cutter diameter alone. ご注文の前に, check the required angle, カッター径, シャンク径, 全長, available machining space, and part geometry together.

For requirements outside the listed specifications, OMIST can review the required dimensions from a tool drawing, 部品図, dimensional sketch, or other available application information.

150 Degree Chamfer Mill Specification Options

The following dimensions represent the currently confirmed product combinations for this 3-flute straight-flute series.

カスタムディメンション

If the listed dimensions do not match the requirement, provide the required cutter diameter, シャンク径, 全長, and other available dimensional information.

You can also submit a tool drawing, 部品図, or dimensional sketch when the cutter must match an existing tool or a specific part feature.

Applications and Selection

When to Use a 150 Degree Chamfer Mill

Choose this product when the part drawing or confirmed machining requirement specifies a 150° chamfer angle.

Typical operations include chamfering, バリ取り, and edge finishing where the 150° cutter geometry matches the required part feature.

したがって, use the drawing or machining requirement to determine the required angle rather than selecting an angle only because a particular cutter size is available.

Confirm the 150° Requirement Before Ordering

Start by confirming the required angle on the part drawing or machining specification.

After you confirm the 150° requirement, check whether the cutter diameter, シャンク径, and overall length fit the available machining space and toolholding setup.

If the listed dimensions do not match the part geometry, send the available dimensions or drawing for evaluation rather than selecting the nearest size without confirmation.

ワーク材質

The confirmed factory information covers:

• 金型鋼
• 硬化鋼
• アルミニウム
• 銅
• プラスチック

Please state the workpiece material when requesting a quotation so it can be reviewed together with the tool dimensions and machining requirement.

Select a Listed Size or Request a Non-Standard Tool

If a listed size matches the requirement, use the specification table to confirm the main dimensions before ordering.

Consider a non-standard tool when the listed combinations do not match the required angle, カッター径, シャンク径, 全長, or available machining space.

主な機能

• Solid carbide construction
• Straight-flute geometry
• 3-flute configuration
• Listed cutter diameters from Ø4 to Ø12 mm
• Matching shank diameters for the listed sizes
• Non-standard angle and dimension requests can be evaluated

カスタム 150 Degree Chamfer Mill Manufacturing

Non-Standard Angle and Dimension Requests

For non-standard straight-flute chamfer cutter requirements, OMIST can evaluate angles from 30° to 160° in 5° increments.

OMIST confirms the final angle and dimensional specification according to the customer requirement before production.

This page remains focused on the 150 度面取りミル. If another angle is required, state the exact angle and dimensions in the inquiry for separate evaluation.

Custom Tools from Drawings or Dimensions

Custom evaluation is useful for replacement tools, existing machining setups, or new parts when the listed dimensions do not match the required chamfer geometry.

For a replacement tool, provide the existing tool drawing or measured dimensions where possible. For a new project, provide a part drawing, dimensional sketch, or required tool dimensions so OMIST can review the specification.

OMIST reviews the supplied information before confirming the final tool specification.

Information Needed for a Quote

Please provide:

• Required angle
• カッター径
• シャンク径
• 全長
• ワーク材質
• 必要数量
• Drawing or dimensional sketch, 利用可能な場合
• Special machining requirements, 該当する場合

If some dimensions are not yet confirmed, send the available information first for review.

FAQ

Can I request another chamfer angle or non-standard size?

はい. Non-standard angle and dimensional requirements can be evaluated according to the requested specification. The final tool specification is confirmed after review.

Do I need a drawing before requesting a quotation?

いいえ. A drawing is helpful but is not required for the first inquiry. You can send the required angle and available dimensional information first, then provide a drawing or dimensional sketch if available.

What information should I provide for a 150 degree chamfer mill quotation?

Provide the required angle, カッター径, シャンク径, 全長, ワーク材質, そして量. A drawing or dimensional sketch is helpful for non-standard requirements.

Can this 150 degree chamfer mill be made to replace an existing tool?

A replacement requirement can be evaluated from the existing tool drawing, dimensional sketch, or measured dimensions. OMIST reviews the supplied information before confirming the replacement tool specification.

関連製品

If another included cutter angle is required, you can also review our 30 Degree Chamfer Mill, 60 Degree Chamfer Mill, 90 Degree Chamfer Mill, 100 Degree Chamfer Mill, そして 120 Degree Chamfer Mill product options.

For more available chamfer cutter options, browse the complete 面取りミル 範囲.

見積もりをリクエストする 150 Degree Chamfer Mill

For a listed or non-standard 150 degree chamfer mill requirement, send the available specification or drawing to sales@cutterbest.com for review and quotation.