精密フライスカッター,あらゆる材料を加工するCNC用の切削工具
いつ選択すべきか 6 フルートエンドミル?
A 6 flute end mill is a practical choice when you need stable side-wall machining, good tool rigidity, or a controlled finishing pass.
Its six cutting edges provide more cutting contacts during each spindle revolution. This structure works well for side milling, プロファイルフライス加工, contour machining, 中仕上げ, そして仕上げ.
The trade-off is reduced chip space. このため, a standard six-flute tool is usually not the best option for deep full-width slotting, 激しい荒削り, or operations that produce a large volume of chips.
Read our application and material selection guide to check the main uses, suitable materials, and cutting limitations.
Recommended Operations for a 6 フルートエンドミル
Side, Profile, and Contour Milling
Six cutting edges provide stable engagement during controlled side cutting. したがって, the tool can machine straight walls, 肩, mold contours, component profiles, and other precision features.
工具振れ, ホルダーの状態, 機械剛性, ラジアルかみ合い, スピード, and feed still affect the final result.
中仕上げと仕上げ
A six-flute tool is suitable when the machining goal is to remove a controlled amount of material while maintaining wall quality and dimensional consistency.
More cutting edges can leave finer cutting marks during a finishing pass. しかし, the final surface quality also depends on the holder, 機械, ツールパス, ワーク材質, および切断パラメータ.
浅い溝加工
Shallow slotting is possible when chips can leave the cutting area effectively.
For deeper slots or full-width cutting, a lower-flute tool may provide more chip space and more reliable chip evacuation.
高速加工
Six-flute tools can support high-speed machining when the carbide grade, コーティング, 切断形状, ホルダー, and parameters match the application.
High spindle speed alone is not enough. The complete machining strategy must also control heat, なくなる, 振動, および切りくず排出.
Operations Not Normally Recommended
Avoid a standard six-flute design for:
- 全幅の深い溝加工
- Heavy roughing
- Aggressive chip removal
- Unstable machine setups
- Operations that produce large chips
- Cutting conditions with poor chip evacuation
In these situations, fewer flutes usually provide more chip space.
Read our four-flute and six-flute comparison when deciding whether chip evacuation or finishing stability matters more.
For a broader comparison, 私たちのを読んでください flute-count selection guide.
を選択してください 6 Flute End Mill by Workpiece Material
Different workpiece materials require different carbide grades, コーティング, flute geometries, and edge preparations.
The material name alone is not enough to select the tool. Also consider the material hardness, 切込み深さ, 冷却水の状態, 機械剛性, および機械加工作業.
Carbon Steel and Alloy Steel
AlTiN and TiAlN coatings are common options for carbon steel and alloy steel.
Machinists mainly use six-flute tools for side milling, プロファイルフライス加工, 中仕上げ, and finishing in these materials.
ステンレス鋼
A 6 flute end mill can machine 304, 316, and other stainless steel grades when the cutting geometry, コーティング, クーラント方式, スピード, and feed match the application.
AlTiN and TiSiN coatings are available. The final selection depends on the stainless steel grade, 硬度, 切込み深さ, および機械加工作業.
Tool Steel and Pre-Hardened Steel
Tool steel and pre-hardened steel require suitable edge strength and stable cutting conditions.
超硬グレード, コーティング, core design, and edge preparation should match the workpiece hardness and the amount of material being removed.
Hardened Steel up to HRC65
Different hardness ranges require different tool series. HRC45, HRC55, HRC60, and HRC65 do not describe one identical tool that can machine every hardness level.
HRC45–50: TiAlN or AlTiN coating
HRC50–55: TiAlN or AlTiN coating
HRC55–60: TiSiN coating
HRC60–65: TiSiN coating
Please send the exact material grade and hardness so that we can match the carbide grade, コーティング, core design, and edge preparation.
鋳鉄
Six-flute tools can be produced for cast iron side milling, プロファイル加工, そして仕上げ.
The cutting-edge preparation should match the type of cast iron and the required surface condition.
Titanium Alloy
Titanium machining requires careful control of cutting heat and tool load.
Six-flute tools for titanium can use TiSiN or AlTiN coatings with application-specific flute geometry, エッジの準備, and coolant design.
Please provide the titanium grade, 切断作業, 切込み深さ, 工具オーバーハング, and coolant condition before confirming the tool design.
アルミニウム, 銅, and Non-Ferrous Metals
Six-flute tools can machine aluminum, 銅, and other non-ferrous materials when they use a dedicated flute shape, sharp cutting edge, suitable chip-control design, and the correct coating.
DLC and uncoated options are available. しかし, six flutes are not normally the first choice for deep aluminum slots or heavy chip removal.
High-Temperature and Nickel-Based Alloys
High-temperature and nickel-based alloys require a specially designed tool.
Please provide the alloy grade, 材質の硬さ, 機械加工作業, クーラント方式, and current cutting conditions for evaluation.
Available End and Shank Designs
Flat and Square End
Flat and square end designs are suitable for straight walls, flat-bottom features, 肩, 側面フライス加工, and finishing passes.
私たちのものを見る フラットエンドミル range for more flat-bottom cutting tool options.
Corner Radius End
A corner radius strengthens the transition between the end cutting edge and the tool side. It can reduce stress at the sharp cutting corner during suitable machining operations.
Standard and custom corner radii are available.
私たちのものを見る ブルノーズエンドミル options for more corner radius designs.
Ball Nose End
Six-flute ball nose designs are available for suitable contour machining and finishing applications.
The tool geometry should match the workpiece profile, ツールパス, 切込み深さ, and required surface quality.
Straight and Weldon Shanks
Straight shanks are available as a standard option. Weldon flat shanks can also be supplied when the holder requires a side-locking surface.
The standard shank tolerance is h6. Custom shank diameters and tolerances are also available.
Center Cutting and Coolant Options
Center-cutting designs are available according to the end style, 直径, および加工要件.
External coolant and internal coolant configurations can both be produced. Internal coolant availability depends on the tool diameter, フルートの形状, and coolant-hole arrangement.
仕様オプション
| アイテム | 利用可能な仕様 |
|---|---|
| 工具材質 | 超硬ソリッド / 炭化タングステン |
| フルートカウント | 6 フルート |
| End Styles | フラット, Square, コーナー半径, or Ball Nose |
| Shank Styles | Straight Shank or Weldon Flat Shank |
| Standard Helix Angle | 35° |
| Custom Geometry | Custom Helix, 可変ヘリックス, Variable Pitch, Unequal Flute Spacing, or Anti-Vibration Design |
| Standard Cutting Diameter | 0.5–25 mm |
| Custom Cutting Diameter | Up to Approximately 30 ミリメートル |
| 全長 | 38–200 mm or Custom |
| フルートの長さ | Selected According to Diameter, 剛性, and Cutting Requirement |
| Metric and Inch Sizes | 利用可能 |
| Cutting Diameter Tolerance | 0 / -0.03 mm Standard |
| シャンク公差 | h6 Standard |
| Flute Length and OAL Tolerance | ±1 mm Standard |
| Corner Radius Tolerance | ±0.02 mm Standard |
| Precision Tolerance | ±0.01 mm, ±0.005 mm, or According to Drawing |
| コーティングオプション | アルティン, TiAlNの, TiSiNの, 錫, Nano Blue, DLC, or Uncoated |
| クーラントオプション | External Coolant or Custom Internal Coolant |
| Custom Services | 寸法, ジオメトリ, コーティング, マーキング, および包装 |
Long flute lengths, small diameters, tight tolerances, and internal coolant designs require technical review before production.
Custom Cutting Geometry
The standard helix angle is 35°. We can also adjust the helix angle, ピッチ, core design, エッジの準備, and flute geometry according to the workpiece material, 機械加工作業, および切断条件.
Please send us your material, 応用, 工具サイズ, 描画, or current tool model. We will review the requirements and recommend a suitable cutting geometry.
カスタム 6 Flute End Mills for HEM
HEM applications require a dedicated tool design rather than a standard six-flute cutter. We can adjust the helix, ピッチ, core, 刃先, コーティング, and coolant design according to the workpiece material, 工具サイズ, 切断パラメータ, および機械の状態.
OEM, マーキング, および包装
We support OEM and ODM orders, including laser logo marking, neutral packaging, private-label packaging, カスタムラベル, and repeat production according to approved specifications. All tool details and packaging requirements will be confirmed before production.
よくある質問
「6フルート」とは 6 mm 切断径?
No. “6 flute” means that the tool has six cutting edges.
The cutting diameter is a separate specification. Standard diameters range from 0.5 mm to 25 ミリメートル, while larger sizes can be customized.
です 6 Flute End Mill Suitable for Stainless Steel?
はい. It can be used for stainless steel side milling, プロファイルフライス加工, 中仕上げ, and finishing when the coating, 幾何学, 冷却剤, スピード, and feed match the material.
AlTiN and TiSiN coatings are available for stainless steel applications.
できる？ 6 アルミカットフルートエンドミル?
はい, with a sharp, material-specific cutting geometry. For deep slots or heavy chip removal, a tool with fewer flutes is usually a better choice.
Can It Be Used for Deep Slotting?
A standard six-flute cutter is not recommended for deep full-width slotting because the smaller flute space can restrict chip evacuation.
Choose a lower-flute tool when deep slots or heavy chip removal are the main requirements.
Is It Suitable for Hardened Steel?
はい. Different tool series are available for HRC45, HRC55, HRC60, and HRC65 materials.
Each series uses a suitable carbide grade, コーティング, core design, and edge preparation.
Can You Manufacture According to a Drawing or Sample?
はい. Production can be based on a drawing, existing tool sample, original model, hand-drawn sketch, or specification list.
Why Choose OMIST?
OMIST has 16 years of cutting tool manufacturing experience and supports standard tools, サンプル, small batches, custom designs, and repeat production.
Tools are manufactured according to the confirmed workpiece material, 機械加工作業, 寸法, コーティング, 許容範囲, マーキング, および梱包要件.
見積もりをリクエストする 6 フルートエンドミル
Send us any available drawing, tool sample, 型番, or dimensions, together with the workpiece material, 硬度, 機械加工作業, コーティング要件, そして量. We will review your application and recommend a suitable standard or custom tool.
You do not need to prepare a complete technical document. 接触 sales@cutterbest.com for pricing, technical review, and production availability.
For more solid carbide milling tool designs, 私たちのものを見る end mill cutter options.