Standard Sizes for Diamond Coated Square End Mills

Start with the cutting diameter you need for graphite machining. These diamond coated square end mills come in specific catalog combinations of length of cut, comprimento efetivo, comprimento total, diâmetro da haste, e contagem de flauta. Confirm the full configuration before ordering. Todas as dimensões estão em mm.
| Cutting Diameter d | Length of Cut L1 | Effective Length L2 | Overall Length L | Shank Diameter D | Flautas |
|---|---|---|---|---|---|
| 0.2 | 0.4 | 2 | 50 | 4 | 2 |
| 0.3 | 0.6 | 3 | 50 | 4 | 2 |
| 0.4 | 0.8 | 4 | 50 | 4 | 2 |
| 0.5 | 1 | 6, 10 | 50 | 4 | 2 |
| 0.6 | 1.2 | 6, 10 | 50 | 4 | 2 |
| 0.8 | 2 | 6, 10 | 50 | 4 | 2 |
| 1† | 3 | 6, 10, 15, — | 50, 60, 75 | 4 | 2, 4 |
| 1.5† | 4 | 6, 10, 15 | 50, 60, 75 | 4 | 2, 4 |
| 2† | 6 | 10, 15, 20, — | 50, 60, 75 | 4 | 2, 4 |
| 3† | 10, 15 | 15, — | 50, 60, 75, 100 | 3, 4 | 4 |
| 4 | 12, 20 | — | 50, 60, 75, 100 | 4 | 4 |
| 6 | 20, 25, 30, 40 | — | 50, 60, 75, 100, 150 | 6 | 4 |
| 8 | 20, 30, 40 | — | 50, 60, 75, 100, 150 | 8 | 4 |
| 10 | 25, 30, 50 | — | 60, 75, 100, 150 | 10 | 4 |
| 12 | 40, 50 | — | 100, 150, 180 | 12 | 4 |
† For the marked diameters, check the exact combination of lengths, diâmetro da haste, e contagem de flauta. The Ø3 mm tool with a 15 mm length of cut has a 100 mm overall length and a Ø3 mm shank.
A dash (—) means the catalog gives no separate L2 value for one or more configurations at that diameter.
Square End Mills for Graphite Machining
Square end mills are used to mill flat-bottom slots in graphite electrodes and to machine pocket floors and straight sidewalls in graphite mold components. For narrow features, the catalog lists two-flute tools at Ø0.2, Ø0.3, Ø0.4, Ø0.5, Ø0.6, and Ø0.8 mm. Check the cutting diameter and effective length against your part drawing.
Dimensions and Drawing
| Symbol | Dimensão |
|---|---|
| d | Cutting diameter across the cutting edges |
| L1 | Length of cut measured along the tool axis from the tip to the end of the cutting edges |
| L2 | Effective length measured along the tool axis from the tip to the L2 reference line on the drawing |
| L | Overall length from the tool tip to the end of the shank |
| D | Shank diameter at the clamping section |
| d1 | Neck diameter where shown on the drawing |
Use L2 as a tool dimension when checking reach. Maximum machining depth depends on clearance between the workpiece, pescoço, haste, and holder in your setup. If neck clearance is critical, request the drawing for the selected configuration to confirm d1.
Selecting a Standard Configuration
- Match the cutting diameter and length of cut to the feature. Start with the slot width or pocket geometry. Check that L1 provides the cutting edge length needed for the operation.
- Compare effective lengths for recessed features. Both Ø0.5 mm configurations have a 1 mm length of cut. Their effective lengths are 6 milímetros e 10 milímetros.
- Check the holder fit. The catalog lists two four-flute Ø3 mm configurations with a 10 mm length of cut and a 50 mm overall length. One has a Ø3 mm shank and the other has a Ø4 mm shank.
For other workpiece materials, veja nosso general-purpose flat end mills.
CVD Coating and Supply
The CVD diamond coating helps resist abrasive wear when milling graphite. We supply standard catalog sizes and review drawings for custom diamond-coated square end mills. For other end geometries, veja nosso CVD diamond-coated end mill range.
Related Technical Guides
- Compare square end, nariz de bola, and corner radius geometries in our guia de seleção de fresa de topo com revestimento de diamante.
- Para eletrodos de grafite, cavidades de molde, and recessed features, veja nosso guia para end mill selection for graphite roughing and finishing.
Solicite um orçamento
- Standard sizes. Send the required cutting diameter and quantity. Include any specified length of cut, comprimento efetivo, comprimento total, diâmetro da haste, e contagem de flauta. We’ll confirm the catalog configuration before quoting.
- Custom tools. Envie um desenho, sketch, ou dimensões principais, along with the graphite feature to be machined and the quantity. For recessed features, include the required reach and any clearance limits.
If you have only partial dimensions, send what you have so we can start the review.
E-mail vendas@cutterbest.com ou send your requirements on WhatsApp for a quote.
Cortadores de fresagem de precisão,Ferramentas de corte para usinagem CNC de todos os materiais






