Taur Nose End Mill

Bull Nose End Mill Specification Options

A bull nose end mill has a flat cutting bottom with a defined corner radius at the outside cutting edge. Tooling catalogs also commonly list this geometry as a freză cu rază de colț.

General Dimensions

Use the following dimensions to specify the tool:

Check these dimensions together when selecting a standard tool or confirming a non-standard design.

Pentru unelte non-standard, send a drawing when available.

3-Flute Aluminum Series

OMIST offers a standard 3-flute series for aluminum and aluminum-alloy machining.

The confirmed series covers cutter diameters of approximately Ø1–Ø20 mm, with corner radii from R0.2 to R4 across the series. LOC, diametrul tijei, and OAL vary by cutter diameter and tool design.

Cu toate acestea, not every diameter is available with every radius or length combination. OMIST confirms flute finish, surface treatment, and cutting geometry according to the actual machining requirement.

4-Flute Standard Series

The confirmed 4-flute series covers cutter diameters of approximately Ø1–Ø20 mm.

Corner radii represented across the series include:

R0.2 / R0.3 / R0.5 / R1 / R2

Not every radius is available with every cutter diameter. The table below shows representative confirmed configurations rather than a complete model list.

Other D, R, LOC, coadă, and OAL combinations depend on the required tool geometry and machining application.

Opțiuni standard și personalizate

OMIST offers standard 3F and 4F series.

For applications outside the standard range, we can manufacture non-standard sizes and geometries. 2F, 5F, 6F, extended-length tools, and other flute configurations are available for custom requirements.

Custom options may include diameter, raza colțului, LOC, OAL, dimensiunea tijei, număr de flaut, helix, coating or surface treatment, geometria de tăiere, center-cutting design, and tolerance requirements.

în plus, selected 150 mm OAL configurations are available according to cutter diameter, ajunge, și geometrie.

We confirm final manufacturability after reviewing the required dimensions and application.

Aplicații și selecție

The 3-flute standard series is mainly intended for aluminum and aluminum-alloy machining.

The 4-flute series provides the main standard range for other machining requirements. Pentru oțel, oțel inoxidabil, oțel matriță, or hardened-steel applications, OMIST reviews material hardness, dimensiunile sculei, operatie de prelucrare, ajunge, and cutting conditions before confirming the final configuration.

We also select coating or surface treatment according to the actual application rather than using one fixed specification for the whole product family.

Aplicațiile tipice includ:

• Contour milling
• Frezarea profilului
• Semifinisare
• Finisare
• Mold and die machining
• Cavity machining
• Pocket machining where a corner radius is acceptable

For applications that require a sharp cutting corner, vedea Nasul de taur vs moara plată.

For the difference between a flat-bottom radiused cutter and a fully rounded cutting end, vedea Bull Nose vs Ball Nose End Mill.

Corner rounding form cutters are a different tool type used to produce an external workpiece radius. See Raza colțului vs freza de capăt pentru rotunjirea colțului.

Caracteristici cheie

• Flat Bottom with Corner Radius: Combines a flat cutting end with a defined corner radius.
• Standard 3F and 4F Series: Covers multiple metric diameter, rază, and length combinations.
• Application-Matched Configuration: Tool geometry and surface treatment depend on the workpiece and machining conditions.
• Fabricare la comandă: Non-standard dimensions, configurații de flaut, and cutting geometry can be produced from customer requirements or drawings.

Custom Bull Nose End Mill Manufacturing

OMIST supports standard and custom solid carbide bull nose end mills for machining companies, distribuitori, and OEM requirements.

Pentru unelte non-standard, we review the required dimensions, geometrie, center-cutting requirement, and dimensional or radius tolerance against the drawing and machining application.

If a standard size does not fit the part, send the required dimensions, desen, eşantion, or reference image for manufacturability review.

For quotation, please provide the main tool dimensions, materialul piesei de prelucrat, operatie de prelucrare, si cantitate. A drawing is preferred for non-standard requirements, but we can also make an initial review from the available dimensions and machining information.

We confirm MOQ, achievable tolerance, and lead time after reviewing the specification and quantity.

FAQ

Este o freză de capăt cu nas de taur la fel ca o freză de capăt cu raza de colț?

For the flat-bottom, radiused-corner geometry covered on this page, “bull nose end mill” is a common market name, while tooling catalogs often use “corner radius end mill.” Confirm the exact tool by its dimensions and geometry.

What flute counts are available?

The standard ranges include a 3-flute aluminum series and a 4-flute series. OMIST can also produce 2F, 5F, 6F, and other flute configurations for custom requirements.

What standard sizes and corner radii are available?

The 3-flute aluminum series covers approximately Ø1–Ø20 mm, cu R0.2–R4 across the series.

The confirmed 4-flute range also covers approximately Ø1–Ø20 mm, cu R0.2, R0.3, R0.5, R1, and R2 represented across the series.

Actual diameter, rază, and length combinations vary by tool size and design.

Can custom bull nose end mills be manufactured from a drawing?

Da. OMIST can review non-standard dimensions and geometry from a drawing, dimensiunile cerute, eşantion, or machining information.

How should I request a quotation?

Send the main tool dimensions, materialul piesei de prelucrat, operatie de prelucrare, si cantitate. For a non-standard tool, include a drawing or reference image when available.

Request a Quote

Looking for a standard or custom bull nose end mill?

Send your drawing or required dimensions by E-mail or contact us on WhatsApp for specification confirmation and quotation.