3 알루미늄용 플루트 초경 플랫 엔드밀

이것 3 flute end mill combines a solid carbide body, a flat cutting end, and three cutting edges. It produces level bottom surfaces, 직선 측벽, 슬롯, 주머니, 단계, 그리고 스퀘어어깨.

The three-flute structure provides chip space for aluminum machining while supporting stable side milling, 프로파일링, 준결승, 그리고 마무리. It suits applications that require controlled chip evacuation and clean wall surfaces.

We match the tool dimensions, 가장자리 디자인, 코팅, and reach to the confirmed machining requirements.

3 Flute End Mill Specification Options

The following dimensions and options are confirmed according to the customer’s drawing, existing cutter, 가공 응용, 및 주문 요구 사항.

A formal drawing provides the clearest reference. You may also send an existing cutter model, marked sketch, dimension list, or clear product photos.

3 Flute End Mill Specification Options

Recommended Aluminum Machining Operations

이것 3 flute end mill is suitable for:

• 사이드 밀링
• Profile and contour milling
• Slotting and pocket milling
• Step and square shoulder milling
• 준마무리
• 마무리 손질

The flat cutting end creates a level bottom and a clear transition between the bottom and side wall. 그 동안에, the three cutting edges support stable engagement and clean side surfaces.

During slotting and pocket milling, chip control remains important. The cutting depth, 도구 경로, coolant or air blast, and cutting parameters should allow aluminum chips to leave the cutting area smoothly.

For more information about suitable materials and applications, 우리의 글을 읽어보세요 three-flute cutter application guide.

선택 시기 2 플루트 엔드밀

선택하세요 2 flute cutter when deep slotting, 무거운 황삭, or maximum chip space is the main requirement.

선택하세요 3 flute cutter when cutting stability, side-wall quality, 준결승, or finishing is more important and chip evacuation remains under control.

For detailed selection guidance, 우리의 글을 읽어보세요 aluminum flute-count comparison guide.

For deep slotting and heavy aluminum roughing, 당신은 또한 우리를 볼 수 있습니다 2 플루트 엔드밀.

주요 특징

Flat End Geometry

The flat cutting end produces flat-bottom slots, 주머니, 단계, 그리고 어깨. It also creates straight side walls and clear internal corners.

The edge design should match the cutting depth, 도구 경로, and required finish because the sharp outer corners carry more cutting pressure than rounded profiles.

Balanced Three-Flute Design

The three-flute structure balances cutting-edge count, 엄격, 그리고 칩 공간.

Compared with many 2 flute cutters, it provides an additional cutting edge for more stable side milling and finishing. 동시에, it retains more space for aluminum chips than many higher-flute tools.

솔리드 카바이드 구조

The cutter uses solid carbide throughout the cutting section and shank. This construction provides the rigidity and wear resistance required for CNC machining and repeated production work.

Suitable tool holding, 낮은 런아웃, 안정적인 클램핑, and correct cutting parameters help maintain tool life and dimensional consistency.

Sharp Cutting Edges

Sharp cutting edges help reduce cutting resistance during aluminum machining. They also support clean side walls and a smooth machined surface under suitable cutting conditions.

We select the edge preparation according to the operation. A finishing cutter may require a different edge design from a tool used for slotting or higher material removal.

맞춤형 제조

Custom Dimensions and Geometry

We manufacture custom tools when a common cutter does not match the part, 가공 깊이, or machine setup.

Available custom options include cutting diameter, 플루트 길이, 전체 길이, 생크 직경, 목 길이, 도구 범위, 나선 각도, and edge geometry.

더 나은 안정성을 위해, use the shortest suitable flute length and overall length whenever possible. For deeper or restricted areas, we can produce a long-reach or special-length design after confirming the application.

Coating and Surface Selection

The suitable coating or surface treatment depends on the aluminum grade, 가공 작업, 절단 온도, 냉각수 상태, chip adhesion, 및 필요한 공구 수명.

Send your current tool information and machining conditions when requesting a coating recommendation. We will confirm the available option together with the final tool specification.

OEM 마킹 및 포장

We support customer logos, product codes, 맞춤 라벨, individual tool boxes, and distributor packaging.

Please provide the marking content, logo file, packaging reference, 수량. We will confirm the final design before production.

자주 묻는 질문

는 3 flute end mill good for aluminum?

예. 에이 3 flute end mill works well for many aluminum machining operations because it balances chip space, 절단 안정성, 및 표면 마무리.

It is commonly used for side milling, 프로파일 밀링, 준결승, 마무리 손질, and controlled slotting.

는 2 플루트 또는 3 flute end mill better for aluminum?

에이 2 flute cutter offers more chip space, so it often suits deep slotting and heavy roughing.

에이 3 flute cutter provides another cutting edge, which can improve stability and side-wall quality during profiling and finishing. The better option depends on the cutting depth, 도구 경로, and chip-control conditions.

Can you manufacture the tool according to a photo or drawing?

예. We manufacture custom tools according to drawings, marked sketches, existing cutter specifications, or clear photos.

When sending photos, please also include the main dimensions, 공작물 재료, 가공 작업, 수량.

Can you customize the dimensions and coating?

예. We support custom dimensions, 생크 크기, 나선 각도, edge designs, 코팅, markings, 그리고 포장.

We confirm the final configuration after reviewing the machining application and order requirements.

견적을 요청하세요 3 플루트 엔드밀

Send us the workpiece material, 가공 작업, main tool dimensions, 코팅 요구 사항, 수량, 사용 가능한 도면이나 현재 커터 정보.

If some details are unavailable, send what you already have. We will confirm the remaining specifications with you.

그림을 이메일로 보내세요, 도구 사진, 또는 요구사항 sales@cutterbest.com.

or submit the inquiry form below.