Precision Milling Cutters,Cutting Tools for CNC Machining Every Material
The 60 degree chamfer mill is a solid carbide straight flute cutter supplied in a standard 3-flute configuration.
The standard dimensions listed below cover cutter diameter, flute length, shank diameter, and overall length. This 60 degree chamfer milling cutter series provides standard sizes from 3 mm to 12 mm, while OMIST can also evaluate non-standard dimensions based on customer drawings.
Specification Options
The standard series uses a 3-flute straight flute configuration. All dimensions below are in millimeters.
| Cutter Diameter | Flute Length | Shank Diameter | Overall Length | Angle |
|---|---|---|---|---|
| 3 mm | 8 mm | 3 mm | 50 mm | 60° |
| 4 mm | 10 mm | 4 mm | 50 mm | 60° |
| 5 mm | 12 mm | 5 mm | 50 mm | 60° |
| 6 mm | 15 mm | 6 mm | 50 mm | 60° |
| 7 mm | 16 mm | 7 mm | 60 mm | 60° |
| 8 mm | 17 mm | 8 mm | 60 mm | 60° |
| 9 mm | 19 mm | 9 mm | 75 mm | 60° |
| 10 mm | 20 mm | 10 mm | 75 mm | 60° |
| 12 mm | 25 mm | 12 mm | 75 mm | 60° |
Applications and Selection
Chamfering, Deburring and Edge Finishing
This series is suitable for chamfering, deburring, and edge finishing on cast iron, aluminum alloy, and stainless steel. The available sizes allow buyers to select a solid carbide chamfer cutter according to the required tool diameter, reach, and workpiece material.
For other workpiece materials or special machining conditions, please confirm suitability before tool selection.
Select a Standard Size or Request Custom Dimensions
Select the cutter diameter, flute length, shank diameter, and overall length from the specification table above.
However, if the listed dimensions do not match the required application, send the required dimensions or a tool drawing for evaluation.
Not sure which chamfer angle matches your requirement? See our 60 vs 90 vs 120 Degree Chamfer Mills comparison guide before selecting a product series.
Key Features
Solid Carbide Construction
OMIST manufactures all standard tools in this series from solid carbide.
Straight Flute Design
All standard tools in this series use a straight flute design. This confirmed flute geometry is used throughout the standard Ø3–Ø12 mm series, allowing buyers to match the same cutter design across different tool diameters and lengths.
Standard 3-Flute Configuration
All standard sizes listed on this page use a 3-flute configuration. OMIST can review other flute configurations for non-standard requirements.
Custom 60 Degree Chamfer Mill Manufacturing
In addition to the listed standard sizes, OMIST can evaluate custom 60 degree chamfer mill requirements based on customer drawings and application information.
OMIST confirms final tool dimensions and configurations after technical review.
Custom Tools from Customer Drawings
Send an existing tool drawing, dimensional sketch, or required dimensions for evaluation. Please include the required angle and other dimensional requirements in the drawing or inquiry.
Information Needed for a Quote
Please provide:
- Required angle
- Required dimensions: cutter diameter, flute length, shank diameter, and overall length
- Workpiece material
- Required quantity
- Tool drawing or dimensional sketch, if available
- Any special application requirements
FAQ
What is a 60 degree chamfer mill used for?
A 60 degree chamfer mill is used for chamfering, deburring, and edge finishing where a 60° cutter is required. Buyers may also encounter the broader term 60 degree milling cutter, but this page specifically covers a solid carbide straight flute chamfer cutter series.
What standard sizes are available for the 60 degree chamfer mill?
The standard 3-flute series covers cutter diameters from 3 mm to 12 mm, with flute lengths from 8 mm to 25 mm and overall lengths of 50 mm, 60 mm, or 75 mm.
What materials can this 60 degree chamfer cutter machine?
The current product specification lists cast iron, aluminum alloy, and stainless steel as applicable workpiece materials. For other materials, please send the application details to OMIST for evaluation.
Can you manufacture a custom 60 degree chamfer mill from a drawing?
Yes. OMIST can evaluate non-standard chamfer cutter requirements according to customer drawings and application information. OMIST confirms final specifications after technical review.
Related Products
If another included cutter angle is required, you can also review our 30 Degree Chamfer Mill, 90 Degree Chamfer Mill, 100 Degree Chamfer Mill, 120 Degree Chamfer Mill, and 150 Degree Chamfer Mill product options.
For more available chamfer cutter options, browse the complete Chamfer Mills range.
Request a Quote for a 60 Degree Chamfer Mill
Send your standard size requirement or custom tool drawing to sales@cutterbest.com for quotation review.
OMIST will review the confirmed tooling requirement and provide a quotation.