Tel: 0086-15907552669 E-mail: sales@cutterbest.com

Despre Contact |

Diamond Coated Square End Mills for Graphite

Mori de capat/

Freze cu capăt pătrate acoperite cu diamant CVD pentru grafit

We supply CVD diamond-coated square end mills, also called flat end mills, for machining graphite electrodes and mold components. Choose a standard catalog size or send a drawing for a custom configuration.

MaterialCarbură solidă
ÎnvelișCVD diamond coating
Sfârșitul GeometrieiCapăt pătrat (flat end)
Materialul piesei de prelucratGrafit
Standard Cutting DiametersListed sizes from Ø0.2 to Ø12 mm
Standard Flute Count2 sau 4, depending on the configuration
Supply OptionsStandard catalog sizes and drawing-based custom configurations

Notă de produs
See the size table and dimension drawing in Product Details to check the available configurations for your application.

  • Detalii despre produs
  • Sprijini
  • Payment & Delivery

Standard Sizes for Diamond Coated Square End Mills

CVD Diamond Coated Square End Mill Dimensions

Start with the cutting diameter you need for graphite machining. These diamond coated square end mills come in specific catalog combinations of length of cut, lungime efectivă, lungime totală, diametrul tijei, și număr de flaut. Confirm the full configuration before ordering. All dimensions are in mm.

Cutting Diameter dLength of Cut L1Effective Length L2Overall Length LShank Diameter DFluiere
0.20.425042
0.30.635042
0.40.845042
0.516, 105042
0.61.26, 105042
0.826, 105042
1†36, 10, 15, —50, 60, 7542, 4
1.5†46, 10, 1550, 60, 7542, 4
2†610, 15, 20, —50, 60, 7542, 4
3†10, 1515, —50, 60, 75, 1003, 44
412, 20—50, 60, 75, 10044
620, 25, 30, 40—50, 60, 75, 100, 15064
820, 30, 40—50, 60, 75, 100, 15084
1025, 30, 50—60, 75, 100, 150104
1240, 50—100, 150, 180124

† For the marked diameters, check the exact combination of lengths, diametrul tijei, și număr de flaut. The Ø3 mm tool with a 15 mm length of cut has a 100 mm overall length and a Ø3 mm shank.

A dash (—) means the catalog gives no separate L2 value for one or more configurations at that diameter.

Square End Mills for Graphite Machining

Square end mills are used to mill flat-bottom slots in graphite electrodes and to machine pocket floors and straight sidewalls in graphite mold components. For narrow features, the catalog lists two-flute tools at Ø0.2, Ø0.3, Ø0.4, Ø0.5, Ø0.6, and Ø0.8 mm. Check the cutting diameter and effective length against your part drawing.

Dimensions and Drawing

SimbolDimensiune
dCutting diameter across the cutting edges
L1Length of cut measured along the tool axis from the tip to the end of the cutting edges
L2Effective length measured along the tool axis from the tip to the L2 reference line on the drawing
LOverall length from the tool tip to the end of the shank
DShank diameter at the clamping section
d1Neck diameter where shown on the drawing

Use L2 as a tool dimension when checking reach. Maximum machining depth depends on clearance between the workpiece, gât, coadă, and holder in your setup. If neck clearance is critical, request the drawing for the selected configuration to confirm d1.

Selecting a Standard Configuration

  • Match the cutting diameter and length of cut to the feature. Start with the slot width or pocket geometry. Check that L1 provides the cutting edge length needed for the operation.
  • Compare effective lengths for recessed features. Both Ø0.5 mm configurations have a 1 mm length of cut. Their effective lengths are 6 mm și 10 mm.
  • Check the holder fit. The catalog lists two four-flute Ø3 mm configurations with a 10 mm length of cut and a 50 mm overall length. One has a Ø3 mm shank and the other has a Ø4 mm shank.

For other workpiece materials, vezi noastre general-purpose flat end mills.

CVD Coating and Supply

The CVD diamond coating helps resist abrasive wear when milling graphite. We supply standard catalog sizes and review drawings for custom diamond-coated square end mills. For other end geometries, vezi noastre CVD diamond-coated end mill range.

Related Technical Guides

Solicitați o cotație

  • Standard sizes. Send the required cutting diameter and quantity. Include any specified length of cut, lungime efectivă, lungime totală, diametrul tijei, și număr de flaut. We’ll confirm the catalog configuration before quoting.
  • Instrumente personalizate. Trimite un desen, sketch, sau dimensiunile cheie, along with the graphite feature to be machined and the quantity. For recessed features, include the required reach and any clearance limits.

If you have only partial dimensions, send what you have so we can start the review.

E-mail sales@cutterbest.com sau send your requirements on WhatsApp for a quote.

Technical and Order Support

For help selecting a tool, share the feature you need to machine, the graphite grade if known, and any available drawing or dimensions.

For a machining issue, send the tool dimensions or order number, a brief description of the issue and when it occurs, and clear photos of the tool or machined feature. Include the holder setup, tool stickout, and cutting conditions if available.

For an existing order, include the order number and the item concerned. E-mail sales@cutterbest.com sau contactați-ne pe WhatsApp.

ayment

We confirm the tool specifications, quantities, and order total with you before payment. Refer to your quotation or pro forma invoice (PI) for the payment terms and instructions.

Productie

Pentru instrumente personalizate, we confirm production arrangements after agreeing on the final tool specifications and quantity with you.

Transport

Provide the delivery destination so we can confirm shipping arrangements. For payment or delivery questions, include your quotation or order number when contacting us by E-mail sau WhatsApp.

Prev:

Următor:

Anchetă

    PersonalAfaceriDistribuitor

    Lasă un răspuns

    Lăsaţi un mesaj