정밀 밀링 커터,모든 재료를 가공하는 CNC용 절삭 공구
When Should You Choose a 6 플루트 엔드밀?
에이 6 flute end mill is a practical choice when you need stable side-wall machining, good tool rigidity, or a controlled finishing pass.
Its six cutting edges provide more cutting contacts during each spindle revolution. This structure works well for side milling, 프로파일 밀링, 윤곽 가공, 준결승, 그리고 마무리.
The trade-off is reduced chip space. 이러한 이유로, a standard six-flute tool is usually not the best option for deep full-width slotting, 무거운 황삭, or operations that produce a large volume of chips.
Read our application and material selection guide to check the main uses, 적합한 재료, and cutting limitations.
Recommended Operations for a 6 플루트 엔드밀
옆, 윤곽, and Contour Milling
Six cutting edges provide stable engagement during controlled side cutting. 그러므로, the tool can machine straight walls, 어깨, 금형 윤곽, component profiles, and other precision features.
도구 런아웃, 홀더 상태, 기계 강성, 방사형 결합, 속도, and feed still affect the final result.
준마무리 및 마무리
A six-flute tool is suitable when the machining goal is to remove a controlled amount of material while maintaining wall quality and dimensional consistency.
More cutting edges can leave finer cutting marks during a finishing pass. 하지만, the final surface quality also depends on the holder, 기계, 도구 경로, 공작물 재료, 및 절단 매개변수.
Shallow Slotting
Shallow slotting is possible when chips can leave the cutting area effectively.
For deeper slots or full-width cutting, a lower-flute tool may provide more chip space and more reliable chip evacuation.
고속 가공
Six-flute tools can support high-speed machining when the carbide grade, 코팅, 절단 형상, 보유자, and parameters match the application.
High spindle speed alone is not enough. The complete machining strategy must also control heat, 런아웃, 진동, 칩 배출.
Operations Not Normally Recommended
Avoid a standard six-flute design for:
- 깊은 전폭 슬롯팅
- Heavy roughing
- Aggressive chip removal
- Unstable machine setups
- Operations that produce large chips
- Cutting conditions with poor chip evacuation
이러한 상황에서는, fewer flutes usually provide more chip space.
Read our four-flute and six-flute comparison when deciding whether chip evacuation or finishing stability matters more.
더 폭넓은 비교를 위해, 우리의 글을 읽어보세요 flute-count selection guide.
선택하세요 6 Flute End Mill by Workpiece Material
Different workpiece materials require different carbide grades, 코팅, flute geometries, and edge preparations.
The material name alone is not enough to select the tool. Also consider the material hardness, 절단 깊이, 냉각수 상태, 기계 강성, 및 가공작업.
탄소강 및 합금강
AlTiN and TiAlN coatings are common options for carbon steel and alloy steel.
Machinists mainly use six-flute tools for side milling, 프로파일 밀링, 준결승, and finishing in these materials.
스테인레스 스틸
에이 6 flute end mill can machine 304, 316, and other stainless steel grades when the cutting geometry, 코팅, 냉각수 방식, 속도, and feed match the application.
AlTiN and TiSiN coatings are available. The final selection depends on the stainless steel grade, 경도, 절단 깊이, 및 가공작업.
Tool Steel and Pre-Hardened Steel
Tool steel and pre-hardened steel require suitable edge strength and stable cutting conditions.
초경 등급, 코팅, 핵심 디자인, and edge preparation should match the workpiece hardness and the amount of material being removed.
Hardened Steel up to HRC65
Different hardness ranges require different tool series. HRC45, HRC55, HRC60, and HRC65 do not describe one identical tool that can machine every hardness level.
HRC45–50: TiAlN 또는 AlTiN 코팅
HRC50–55: TiAlN 또는 AlTiN 코팅
HRC55–60: TiSiN coating
HRC60–65: TiSiN coating
Please send the exact material grade and hardness so that we can match the carbide grade, 코팅, 핵심 디자인, 및 가장자리 준비.
주철
Six-flute tools can be produced for cast iron side milling, 프로파일 가공, 그리고 마무리.
The cutting-edge preparation should match the type of cast iron and the required surface condition.
티타늄 합금
Titanium machining requires careful control of cutting heat and tool load.
Six-flute tools for titanium can use TiSiN or AlTiN coatings with application-specific flute geometry, 가장자리 준비, and coolant design.
Please provide the titanium grade, 절단 작업, 절단 깊이, 도구 돌출부, and coolant condition before confirming the tool design.
알류미늄, 구리, and Non-Ferrous Metals
Six-flute tools can machine aluminum, 구리, and other non-ferrous materials when they use a dedicated flute shape, sharp cutting edge, suitable chip-control design, and the correct coating.
DLC and uncoated options are available. 하지만, six flutes are not normally the first choice for deep aluminum slots or heavy chip removal.
High-Temperature and Nickel-Based Alloys
High-temperature and nickel-based alloys require a specially designed tool.
Please provide the alloy grade, 재료 경도, 가공 작업, 냉각수 방식, and current cutting conditions for evaluation.
Available End and Shank Designs
Flat and Square End
Flat and square end designs are suitable for straight walls, 평평한 바닥 기능, 어깨, 사이드 밀링, and finishing passes.
우리의 보기 플랫 엔드밀 range for more flat-bottom cutting tool options.
Corner Radius End
A corner radius strengthens the transition between the end cutting edge and the tool side. It can reduce stress at the sharp cutting corner during suitable machining operations.
Standard and custom corner radii are available.
우리의 보기 불 노즈 엔드밀 options for more corner radius designs.
Ball Nose End
Six-flute ball nose designs are available for suitable contour machining and finishing applications.
The tool geometry should match the workpiece profile, 도구 경로, 절단 깊이, 그리고 요구되는 표면 품질.
Straight and Weldon Shanks
Straight shanks are available as a standard option. Weldon flat shanks can also be supplied when the holder requires a side-locking surface.
The standard shank tolerance is h6. Custom shank diameters and tolerances are also available.
Center Cutting and Coolant Options
Center-cutting designs are available according to the end style, 지름, 및 가공 요구 사항.
External coolant and internal coolant configurations can both be produced. Internal coolant availability depends on the tool diameter, 플루트 기하학, and coolant-hole arrangement.
사양 옵션
| 목 | Available Specification |
|---|---|
| 도구 재료 | 솔리드 카바이드 / 텅스텐 카바이드 |
| 플루트 카운트 | 6 플루트 |
| End Styles | 평평한, 정사각형, 코너 반경, or Ball Nose |
| Shank Styles | Straight Shank or Weldon Flat Shank |
| Standard Helix Angle | 35° |
| Custom Geometry | Custom Helix, 가변 나선, 가변 피치, Unequal Flute Spacing, or Anti-Vibration Design |
| Standard Cutting Diameter | 0.5–25 mm |
| Custom Cutting Diameter | Up to Approximately 30 mm |
| 전체 길이 | 38–200 mm or Custom |
| 플루트 길이 | Selected According to Diameter, 엄격, and Cutting Requirement |
| Metric and Inch Sizes | 사용 가능 |
| Cutting Diameter Tolerance | 0 / -0.03 mm Standard |
| 생크 공차 | h6 Standard |
| Flute Length and OAL Tolerance | ±1 mm Standard |
| Corner Radius Tolerance | ±0.02 mm Standard |
| Precision Tolerance | ±0.01 mm, ±0.005 mm, or According to Drawing |
| 코팅 옵션 | 금, TiAlN, 티신, 주석, 나노블루, DLC, or Uncoated |
| Coolant Options | External Coolant or Custom Internal Coolant |
| Custom Services | 치수, 기하학, 코팅, 마킹, 및 포장 |
Long flute lengths, small diameters, tight tolerances, and internal coolant designs require technical review before production.
Custom Cutting Geometry
The standard helix angle is 35°. We can also adjust the helix angle, 정점, 핵심 디자인, 가장자리 준비, and flute geometry according to the workpiece material, 가공 작업, 및 절단 조건.
Please send us your material, 애플리케이션, 도구 크기, 그림, or current tool model. We will review the requirements and recommend a suitable cutting geometry.
관습 6 Flute End Mills for HEM
HEM applications require a dedicated tool design rather than a standard six-flute cutter. We can adjust the helix, 정점, 핵심, 최첨단, 코팅, and coolant design according to the workpiece material, 도구 크기, 절단 매개변수, 그리고 기계 상태.
OEM, 마킹, 및 포장
우리는 OEM 및 ODM 주문을 지원합니다, including laser logo marking, 중립 포장, private-label packaging, 맞춤 라벨, and repeat production according to approved specifications. All tool details and packaging requirements will be confirmed before production.
자주 묻는 질문
Does “6 Flute” Mean a 6 mm Cutting Diameter?
아니요. “6 flute” means that the tool has six cutting edges.
The cutting diameter is a separate specification. Standard diameters range from 0.5 mm 에 25 mm, while larger sizes can be customized.
는 6 Flute End Mill Suitable for Stainless Steel?
예. It can be used for stainless steel side milling, 프로파일 밀링, 준결승, and finishing when the coating, 기하학, 냉각수, 속도, and feed match the material.
AlTiN and TiSiN coatings are available for stainless steel applications.
수 6 Flute End Mill Cut Aluminum?
예, with a sharp, material-specific cutting geometry. For deep slots or heavy chip removal, a tool with fewer flutes is usually a better choice.
Can It Be Used for Deep Slotting?
A standard six-flute cutter is not recommended for deep full-width slotting because the smaller flute space can restrict chip evacuation.
Choose a lower-flute tool when deep slots or heavy chip removal are the main requirements.
Is It Suitable for Hardened Steel?
예. Different tool series are available for HRC45, HRC55, HRC60, and HRC65 materials.
Each series uses a suitable carbide grade, 코팅, 핵심 디자인, 및 가장자리 준비.
Can You Manufacture According to a Drawing or Sample?
예. Production can be based on a drawing, existing tool sample, original model, hand-drawn sketch, or specification list.
OMIST를 선택하는 이유?
OMIST는 16 years of cutting tool manufacturing experience and supports standard tools, 샘플, small batches, custom designs, 생산을 반복하고.
Tools are manufactured according to the confirmed workpiece material, 가공 작업, 치수, 코팅, 용인, 마킹, 및 포장 요구 사항.
견적을 요청하세요 6 플루트 엔드밀
Send us any available drawing, 도구 샘플, 모델 번호, or dimensions, together with the workpiece material, 경도, 가공 작업, 코팅 요구 사항, 수량. We will review your application and recommend a suitable standard or custom tool.
You do not need to prepare a complete technical document. 연락하다 sales@cutterbest.com for pricing, technical review, and production availability.
For more solid carbide milling tool designs, 우리의 보기 end mill cutter options.