정밀 밀링 커터,모든 재료를 가공하는 CNC용 절삭 공구
Roughing end mills remove stock before semi-finishing or finishing. Their serrated cutting edges divide chips into smaller sections, which improves chip control and reduces cutting resistance during suitable rough-machining operations.
The tool name alone does not determine whether a cutter will perform well. The correct design also depends on the workpiece material, 경도, machining allowance, 커터 직경, 플루트 길이, 기계 강성, tool overhang, holder condition, and cutting strategy.
Our standard offering focuses on solid carbide roughing cutters for CNC machining. HSS and cobalt HSS options are also available for selected conventional machines, larger cutter sizes, lower cutting speeds, or special customer requirements.
Why Use a Serrated Roughing End Mill?
Improved Chip Control
A smooth cutting edge can produce long or continuous chips during heavy cutting. In comparison, a serrated edge divides the chip along the flute and creates smaller chip sections.
This chip-breaking action reduces chip accumulation in pockets and slots. It also lowers the risk of recutting when the flute design, 냉각수 방식, and toolpath match the operation.
Efficient Stock Removal
Roughing cutters are intended for removing machining allowance rather than producing the final surface.
They are commonly used before a semi-finishing or finishing pass in mold cavities, 주머니, 슬롯, 측벽, forged parts, cast components, and general CNC-machined parts.
Lower Cutting Resistance
The interrupted serrated edge does not engage the workpiece in the same way as a continuous finishing edge. 결과적으로, the cutting load is easier to manage in suitable roughing operations.
Actual performance depends on the machine, holder, 절단 깊이, radial engagement, tool overhang, 냉각수 상태, 및 공작물 재료.
Flexible Tool Design
Different machining conditions require different flute counts, serrated pitches, carbide grades, 코팅, and tool lengths.
Selecting a roughing cutter only by diameter can lead to poor chip evacuation, 진동, edge damage, or unstable tool life. We recommend reviewing the complete machining condition before confirming the final specification.
Available Roughing End Mill Options
Solid Carbide Roughing Cutters
Solid carbide is the primary option for modern CNC machining. It provides good rigidity, 내마모성, and cutting stability when the tool geometry matches the workpiece and operation.
Different carbide grades are available for general steel, 스테인레스 스틸, 주철, 티타늄 합금, and selected hardened-material applications.
HSS Roughing Cutters
HSS M2, M35, and M42 roughing cutters are available on request.
These tools can suit conventional machines, lower cutting speeds, larger cutter sizes, 단속 절단, or applications that require greater tool toughness. They are not the main option for high-speed CNC machining, but they remain useful under selected conditions.
Coarse-Pitch Roughing Cutters
Coarse-pitch cutters have wider spacing between the serrated teeth. 그러므로, they provide more chip space and generally suit soft or chip-forming materials.
They are often considered for aluminum, 구리, soft carbon steel, and other applications where chip evacuation is a major concern.
Fine-Pitch Roughing Cutters
Fine-pitch cutters have more closely spaced serrated teeth. They normally provide smoother engagement and more stable stock removal.
They commonly suit carbon steel, 합금강, 스테인레스 스틸, 주철, 티타늄 합금, and selected hardened-steel applications.
The pitch still needs to match the cutter diameter, machining allowance, 작업, 및 기계 강성.
Multiple Flute Options
We can produce 2-, 3-, 4-, 5-, and 6-flute roughing designs. 하지만, not every flute count suits every cutter diameter or workpiece material.
Fewer flutes normally provide more chip space. 대조적으로, more flutes provide additional cutting edges and can improve stability under suitable conditions.
A 4-flute design is a common choice for general steel roughing, but it should not be treated as a universal solution.
How to Choose Roughing End Mills
Start with the Workpiece Material
The workpiece grade and hardness influence the carbide grade, 플루트 수, serrated pitch, 코팅, 가장자리 준비, and cutting strategy.
예를 들어, aluminum needs sharp edges and sufficient chip space. Stainless steel requires heat control and stable cutting. Cast iron needs wear resistance, while titanium alloys require careful control of cutting heat and tool engagement.
Confirm the Machining Operation
Pocket roughing, slot roughing, 사이드 밀링, mold roughing, full-slot cutting, and trochoidal milling create different loads on the tool.
A cutter that works well for side roughing may not be the best option for a deep full-width slot. 그러므로, confirm the operation and toolpath before selecting the tool geometry.
Check Machine and Holder Rigidity
Long tool overhang, weak clamping, spindle runout, insufficient machine power, and unstable workholding can cause vibration, edge chipping, or premature tool failure.
Use the shortest practical cutter and flute length whenever possible. A rigid holder and stable workpiece setup are also important for heavy stock removal.
Match the Flute Count to Chip Space
A tool with too many flutes may not provide enough chip space for a soft or adhesive material. On the other hand, too few flutes may reduce cutting stability in some steel applications.
The final flute count should match the material, 커터 직경, radial engagement, 절단 깊이, toolpath, and coolant method.
Select the Coating by Material
The coating should support the workpiece material and cutting temperature. It should not be selected only by appearance or price.
Coating selection also needs to consider coolant use, 절단 속도, machine stability, and the required balance between edge sharpness and wear resistance.
Material Selection Guidance
The following recommendations provide a general starting point. The final flute count, pitch, 코팅, 초경 등급, and tool dimensions should match the actual material grade, 경도, 커터 직경, 기계, 및 가공작업.
| 공작물 재료 | Common Tool Direction | 선택 참고 사항 |
|---|---|---|
| Carbon Steel and Alloy Steel | 4-플루트, fine-pitch carbide cutter; TiAlN or AlTiN | Match the carbide grade and coating to hardness, stock allowance, 열을 자르다, and machine power. |
| 스테인레스 스틸 | Fine-pitch carbide cutter; AlTiN or TiSiN | Control heat, reduce unnecessary tool overhang, and maintain stable chip evacuation. |
| 주철 | Fine-pitch carbide cutter; TiAlN or selected uncoated design | Prioritize edge strength and wear resistance because cast iron can be abrasive. |
| Aluminum and Copper Alloys | 2- or 3-flute, coarse-pitch cutter; DLC or uncoated | Use sharp cutting edges and sufficient flute space to reduce chip adhesion and recutting. |
| Titanium Alloys | Application-specific fine-pitch carbide cutter; AlTiN or TiSiN | Control radial engagement, 열을 자르다, coolant delivery, and tool overhang. |
| 경화강 | Custom fine-pitch carbide cutter; AlTiN or TiSiN | Selected applications up to approximately HRC 60 require a rigid machine setup, short overhang, and controlled stock removal. |
These directions are not fixed rules. Final tool selection should be based on the complete machining condition.
코팅 옵션
TiAlN
TiAlN is commonly considered for carbon steel, 합금강, and selected cast-iron applications. It provides a practical balance of heat resistance and wear resistance for general rough machining.
금
AlTiN provides good heat and oxidation resistance. It can suit steel, 스테인레스 스틸, and selected hardened-material applications.
티신
TiSiN can suit high-temperature cutting and difficult materials such as stainless steel and titanium alloys.
DLC
DLC offers low friction and helps reduce material adhesion when machining aluminum, 구리, 기타 비철재료.
For abrasive high-silicon cast aluminum alloys, such as selected A380 or ADC12 applications, a DLC or another application-specific coating can improve wear resistance.
코팅되지 않은
An uncoated cutter maintains a sharp cutting edge and often suits common wrought aluminum grades such as 6061 그리고 7075.
The exact choice depends on the alloy, 냉각수 방식, cutter geometry, 및 절단 조건.
주석
TiN is mainly available for selected HSS roughing cutters and conventional machining requirements. It is not normally the first coating choice for modern solid carbide roughing tools.
When a Roughing End Mill May Not Be the Best Choice
A serrated roughing cutter is not suitable for every operation.
It may not be the best choice when:
- The part has only a small amount of stock remaining.
- The operation requires the final surface finish and dimensional tolerance.
- The component has very thin or flexible walls.
- The machine or holder lacks sufficient rigidity.
- The tool requires excessive overhang.
- The material hardness or machining condition exceeds the tool design.
For very large cutter diameters, high stock-removal requirements, or powerful machining centers, an indexable milling cutter may provide a more economical solution.
In other cases, a standard end mill, finishing end mill, or another machining strategy may provide a better result.
Common Selection and Machining Mistakes
Using a Roughing Cutter for Final Finishing
A serrated cutting edge normally leaves a rougher surface than a smooth finishing edge.
Use the roughing cutter to remove most of the stock. Then leave a controlled amount of material for the final finishing pass.
Choosing the Wrong Coating for Aluminum
A coating intended for steel can increase material adhesion when machining aluminum.
Uncoated or DLC-coated surfaces are often more suitable because they support sharp cutting edges and lower friction. The final choice depends on the aluminum grade and coolant condition.
Using Excessive Tool Overhang
Long overhang reduces tool rigidity and increases the risk of vibration.
Use the shortest practical flute length, 목 길이, and overall length. If a deep cavity requires a long tool, adjust the cutter geometry and cutting strategy accordingly.
칩 배출 무시
Poor chip evacuation can cause chip recutting, heat buildup, edge damage, 그리고 불안정한 절단.
플루트 수, serrated pitch, 냉각수, 공기 폭발, toolpath, and pocket depth should be considered together.
Selecting Only by Cutter Diameter
Two cutters with the same diameter can perform very differently because of their flute count, pitch, 초경 등급, 코팅, 길이, 가장자리 준비, and shank design.
A correct recommendation requires more than the cutter diameter alone.
Specification Options
The following specifications describe our general manufacturing capability. Not every combination applies to every tool diameter or machining condition.
| 사양 | 사용 가능한 옵션 |
|---|---|
| 제품명 | Carbide Roughing End Mills |
| Cutting Edge | Wave Serrated / Chip-Breaking Edge |
| Primary Tool Material | 솔리드 카바이드 |
| Optional Tool Material | HSS M2, M35, or M42 |
| 플루트 카운트 | 2, 3, 4, 5, 또는 6 플루트 |
| Pitch Options | Coarse Pitch, Fine Pitch, or Custom Serrated Profile |
| Typical Cutter Diameter | 2–32 mm |
| Typical Flute Length | 4–120 mm |
| Typical Overall Length | 50–200 mm |
| Shank Options | Standard Metric Straight Shank or Custom Shank |
| Size System | 미터법; Inch and Non-Standard Sizes Available on Request |
| 길이 옵션 | 기준, Long Reach, Long Neck, or Extended Overall Length |
| 공작물 재료 | 강철, 스테인레스 스틸, 주철, 알류미늄, 구리, Titanium Alloys, and Selected Hardened Steel |
| Workpiece Hardness | Commonly Up to Approximately HRC 60, Depending on the Application |
| 코팅 옵션 | TiAlN, 금, 티신, DLC, 주석, or Uncoated |
| Order Type | 기준, Sample, Batch, or Custom Production |
The final manufacturable specification depends on the cutter diameter, 플루트 수, pitch, tool material, 코팅, 길이, 용인, 수량, 및 가공 응용.
Custom Roughing End Mills
A standard catalog tool may not suit every part, 기계, or cutting process. We can manufacture custom roughing cutters according to a drawing, 견본, existing tool, 또는 가공 요구 사항.
Custom options may include:
- Non-standard cutter diameter
- Custom flute length and overall length
- Long-reach and long-neck designs
- Custom shank diameter and tolerance
- 5- or 6-flute special designs
- Coarse-, fine-, or custom-pitch serrated edges
- Special chip-breaking groove geometry
- 솔리드 카바이드, ultrafine-grain carbide, HSS, or cobalt HSS
- Application-specific coating
- Diameter and shank tolerance requirements
- 레이저 마킹, customer model, 심벌 마크, 그리고 포장
Please provide the complete machining condition before production. This allows us to review the tool structure as a complete solution rather than treating each parameter separately.
Roughing End Mill vs Finishing End Mill
Roughing and finishing cutters serve different stages of the machining process. A roughing cutter removes most of the stock, while a finishing cutter produces the final surface and dimensions.
| Comparison Item | 러핑엔드밀 | Finishing End Mill |
|---|---|---|
| Main Purpose | 빠른 재고 제거 | Final surface and dimensional control |
| Cutting Edge | Serrated or wave-shaped chip-breaking edge | Smooth continuous cutting edge |
| Chip Control | Breaks chips into smaller sections | Usually produces more continuous chips |
| Cutting Load | Suitable for heavier stock removal | Suitable for lighter finishing cuts |
| 표면 결과 | Leaves a rougher surface and finishing allowance | Produces a smoother final surface |
| Common Applications | 포켓, 슬롯, side, mold, and general roughing | 프로파일링, final sizing, wall finishing, 및 표면 마무리 |
In a typical CNC process, the roughing end mill removes most of the material first. The finishing cutter then removes the remaining allowance and produces the required surface quality and dimensional accuracy.
When the next machining stage requires a smoother surface, final profile, or dimensional control, review our solid carbide finishing end mill solutions.
FAQ About Roughing End Mills
What is a roughing end mill used for?
A roughing end mill removes a large amount of stock before semi-finishing or finishing. Its serrated cutting edge helps break chips and manage cutting resistance during rough machining.
Can a roughing end mill be used for finishing?
It can make a cutting pass, but it is generally not recommended for the final finishing operation. The serrated edge normally leaves a rougher surface than a smooth finishing cutter.
Which roughing end mill is suitable for aluminum?
A cutter with sharp edges, sufficient chip space, fewer flutes, and a coarse-pitch serrated profile often suits aluminum. An uncoated or DLC-coated design can also be selected according to the aluminum grade and coolant condition.
What is the difference between coarse pitch and fine pitch?
Coarse pitch provides more space between the serrated teeth and usually supports chip evacuation in soft or adhesive materials.
Fine pitch provides more cutting contacts and normally produces smoother engagement in steel, 스테인레스 스틸, 주철, and similar materials.
Can roughing end mills machine hardened steel?
Selected custom carbide cutters can be used for hardened-steel applications up to approximately HRC 60.
Applications between HRC 55 and HRC 60 normally require a stable setup, limited radial engagement, suitable carbide and coating, and a controlled machining strategy. This is not a general-purpose solution for every HRC 60 workpiece.
How can I reduce vibration during rough milling?
Use the shortest practical tool, reduce unnecessary overhang, check holder runout, improve workpiece clamping, select a suitable pitch and flute count, and adjust the cutting engagement.
What is the difference between a roughing end mill and a hog mill?
A hog mill is another common name for a roughing end mill with serrated or chip-breaking cutting edges.
하지만, the exact tooth profile, 플루트 수, pitch, and intended application can vary between manufacturers.
Can roughing end mills be used for trochoidal milling?
예. Selected roughing end mills can be used for trochoidal or adaptive toolpaths.
The cutter geometry, radial engagement, 절단 깊이, 기계 강성, and chip-evacuation method must suit the operation.
Do you supply inch sizes?
예. Metric sizes are the standard option, while inch and other non-standard sizes can be manufactured according to the drawing or required dimensions.
What information is required for tool selection?
Please provide the material grade and hardness, 가공 작업, 커터 크기, 절단 깊이, 기계 유형, holder information, drawing or sample, 및 소요수량.
Can you manufacture according to a drawing?
예. We can review 2D drawings, 3D models, 샘플, photographs, or existing tool specifications before confirming production.
Send Your Roughing End Mill Requirement
Need a roughing cutter for pocket machining, mold roughing, slot cutting, 사이드 밀링, or another stock-removal operation? Please email your workpiece material and hardness, 가공 작업, required tool dimensions, machine and holder information, drawing or sample, and order quantity to sales@cutterbest.com. We will review your application and recommend a suitable standard or custom roughing end mill.
Related Products and Resources
우리를 탐험해보세요 엔드밀 커터 for general slotting, 프로파일링, and pocket milling applications.
그만큼 4 플루트 엔드밀 is a common option for steel, 스테인레스 스틸, 일반 CNC 밀링.
Need solid carbide or custom milling tool designs? 우리의 보기 초경 엔드밀 커터.
Learn about common cutter structures and applications in our 밀링 커터 유형 가이드.