정밀 밀링 커터,모든 재료를 가공하는 CNC용 절삭 공구
Long Neck Square End Mill Specifications
A long neck square end mill combines square-end cutting geometry with an extended neck section for features that require additional reach or clearance.
The catalog covers multiple combinations of cutting diameter, 플루트 길이, effective length and neck diameter. 그러므로, use the ranges below for initial selection rather than treating every dimension as freely interchangeable.
| 사양 | Catalog Range |
|---|---|
| 절단 직경 | Ø0.2–4.0 mm |
| 플루트 길이 (L1) | 0.3–3.8 mm |
| Effective Length (L2) | 1-30mm |
| 목 직경 | Ø0.16–3.9 mm |
| 생크 직경 | Ø4 / Ø6mm |
| 전체 길이 | 50 / 60 / 75 mm |
Standard catalog cutting diameters include Ø0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 1.0, 1.5, 2.0, 2.5, 3.0 그리고 4.0 mm. 하지만, the available L1, L2 and neck-diameter combinations depend on the selected catalog series and size.
For other long-reach end geometries, 보다 Long Reach End Mills.
Long Neck Clearance and Square-End Geometry
정사각형 / Flat Cutting Geometry
The square cutting end provides a flat cutting profile for features that require flat bottoms or straight-wall geometry.
In this product group, square and flat describe the same flat-ended geometry rather than two separate long-neck product families.
For general square or flat milling where additional neck clearance is not required, 보다 플랫엔드밀.
Long Neck and Reduced-Neck Clearance
The long neck provides additional access between the cutting section and the larger shank area. This structure helps the tool avoid interference from surrounding walls, shoulders or recessed features.
Where a catalog model has a neck diameter smaller than its cutting diameter, the reduced section provides additional clearance around the tool.
Long neck, long reach and reduced neck describe related but not identical characteristics. 그러므로, use the actual cutting diameter, effective length and neck diameter to confirm the model instead of relying on the product name alone.
Cutting Diameter and Effective Length Selection
Cutting Diameter and Flute Length
Start with the cutting diameter according to the groove, pocket or feature that the cutter must enter. Choose a diameter that fits the required machining area and part geometry.
플루트 길이 (L1) represents the cutting-edge length. Use L1 to confirm the required cutting-edge engagement instead of assuming that a longer effective reach also means a longer cutting edge.
For a broader explanation of common end mill geometries, 보다 엔드밀 커터 유형.
Effective Length and Neck Diameter
Effective Length (L2) becomes important when the cutting area sits deeper inside a groove, 공동, pocket or other recessed feature.
A longer L2 provides additional access. 그 동안에, the neck diameter determines the clearance available around the tool between the cutting section and surrounding workpiece geometry.
Because L2 and neck-diameter combinations vary by catalog size, confirm these dimensions together with the cutting diameter and flute length.
If the required combination does not match a standard catalog size, send a drawing or sketch for review before quotation.
Applications for Long Neck Square End Mills
Deep Grooves, Cavities and Pockets
Use long neck square end mills for deep or restricted features where a standard tool body may not provide enough clearance.
Typical applications can include deep groove milling, deep cavity milling, deep pocket milling, narrow pockets and other restricted-access features where additional reach is required.
The long-neck section helps keep the larger tool body away from surrounding geometry while the square cutting end reaches the required machining area.
Tool selection should still follow the actual part geometry and required access rather than assuming that every deep feature requires the longest available configuration.
Flat Bottoms and Straight-Wall Features
Choose square-end geometry when the machined feature requires a flat bottom or straight-wall form.
When those features sit deeper inside the workpiece, the long-neck structure provides the access needed to reach them while maintaining square / flat cutting geometry.
This combination distinguishes the product from a standard flat end mill used in areas where normal tool reach is already sufficient.
Long Neck Square vs Standard Flat End Mill
Both tools use square / flat cutting geometry. The main difference is the access and clearance required around the tool.
| 선택 포인트 | Long Neck Square End Mill | Standard Flat End Mill |
|---|---|---|
| 도달하다 | Extended access | Standard access |
| Neck Clearance | Additional clearance for restricted features | Suitable where normal body clearance is sufficient |
| 전형적인 특징 | Deep or recessed grooves, 주머니와 구멍 | Normally accessible flat-bottom or straight-wall features |
| 끝 형상 | 정사각형 / 평평한 | 정사각형 / 평평한 |
Choose a standard flat end mill when the tool body can reach the feature without interference. 대조적으로, choose a long neck square end mill when surrounding geometry requires additional reach or neck clearance.
Custom Long Neck Square End Mills
Standard catalog sizes cover multiple combinations of cutting diameter, 플루트 길이, effective length, 목 직경, 생크 직경 및 전체 길이.
비표준 요구 사항의 경우, send a drawing or sketch showing the required dimensions. We can review the requested configuration before quotation and assess manufacturing feasibility.
Custom sizes and configurations are subject to drawing review and manufacturing feasibility.
FAQ
Are long neck and long reach square end mills the same?
The terms often overlap, but they do not always describe exactly the same structure. Long neck emphasizes the extended neck section, while long reach describes the access requirement. Check the actual dimensions when selecting a specific tool.
What is the difference between a long neck square end mill and a standard flat end mill?
Both use square / flat cutting geometry. A long neck version provides additional reach and neck clearance for deeper or more restricted features, while a standard flat end mill suits areas where normal tool access is sufficient.
How do I choose the effective length and neck diameter?
첫 번째, determine the depth and access required by the workpiece feature. Then check Effective Length (L2) against the required reach and Neck Diameter against the available side clearance. The final combination must match an available catalog size or undergo drawing review for a custom configuration.
Can you supply micro-diameter long neck square end mills?
예. The current catalog starts from Ø0.2 mm cutting diameter. Available flute length, effective length and neck-diameter combinations depend on the selected catalog size.
For the broader small-diameter product range, 보다 마이크로 엔드밀.
Can you manufacture custom long neck square end mills from a drawing?
We can review non-standard cutting diameter, 플루트 길이, effective length, 목 직경, shank diameter and overall length requirements based on your drawing or sketch.
Send Your Long Neck Square End Mill Inquiry
Send your long neck square end mill inquiry by email at sales@cutterbest.com, 또는 다음 주소로 직접 문의해 주세요. 왓츠앱.