Standard Sizes for Diamond Coated Square End Mills

Start with the cutting diameter you need for graphite machining. These diamond coated square end mills come in specific catalog combinations of length of cut, эффективная длина, общая длина, диаметр хвостовика, и счет флейты. Confirm the full configuration before ordering. Все размеры указаны в мм..
| Cutting Diameter d | Длина резки L1 | Эффективная длина L2 | Общая длина L | Диаметр хвостовика D | Флейты |
|---|---|---|---|---|---|
| 0.2 | 0.4 | 2 | 50 | 4 | 2 |
| 0.3 | 0.6 | 3 | 50 | 4 | 2 |
| 0.4 | 0.8 | 4 | 50 | 4 | 2 |
| 0.5 | 1 | 6, 10 | 50 | 4 | 2 |
| 0.6 | 1.2 | 6, 10 | 50 | 4 | 2 |
| 0.8 | 2 | 6, 10 | 50 | 4 | 2 |
| 1† | 3 | 6, 10, 15, — | 50, 60, 75 | 4 | 2, 4 |
| 1.5† | 4 | 6, 10, 15 | 50, 60, 75 | 4 | 2, 4 |
| 2† | 6 | 10, 15, 20, — | 50, 60, 75 | 4 | 2, 4 |
| 3† | 10, 15 | 15, — | 50, 60, 75, 100 | 3, 4 | 4 |
| 4 | 12, 20 | — | 50, 60, 75, 100 | 4 | 4 |
| 6 | 20, 25, 30, 40 | — | 50, 60, 75, 100, 150 | 6 | 4 |
| 8 | 20, 30, 40 | — | 50, 60, 75, 100, 150 | 8 | 4 |
| 10 | 25, 30, 50 | — | 60, 75, 100, 150 | 10 | 4 |
| 12 | 40, 50 | — | 100, 150, 180 | 12 | 4 |
† For the marked diameters, check the exact combination of lengths, диаметр хвостовика, и счет флейты. The Ø3 mm tool with a 15 mm length of cut has a 100 mm overall length and a Ø3 mm shank.
тире (—) means the catalog gives no separate L2 value for one or more configurations at that diameter.
Square End Mills for Graphite Machining
Square end mills are used to mill flat-bottom slots in graphite electrodes and to machine pocket floors and straight sidewalls in graphite mold components. For narrow features, the catalog lists two-flute tools at Ø0.2, Ø0.3, Ø0.4, Ø0.5, Ø0.6, and Ø0.8 mm. Check the cutting diameter and effective length against your part drawing.
Dimensions and Drawing
| Символ | Измерение |
|---|---|
| д | Cutting diameter across the cutting edges |
| Л1 | Length of cut measured along the tool axis from the tip to the end of the cutting edges |
| Л2 | Effective length measured along the tool axis from the tip to the L2 reference line on the drawing |
| L | Overall length from the tool tip to the end of the shank |
| D | Shank diameter at the clamping section |
| d1 | Neck diameter where shown on the drawing |
Use L2 as a tool dimension when checking reach. Maximum machining depth depends on clearance between the workpiece, шея, хвостовик, and holder in your setup. If neck clearance is critical, request the drawing for the selected configuration to confirm d1.
Selecting a Standard Configuration
- Match the cutting diameter and length of cut to the feature. Start with the slot width or pocket geometry. Check that L1 provides the cutting edge length needed for the operation.
- Compare effective lengths for recessed features. Both Ø0.5 mm configurations have a 1 мм длина реза. Their effective lengths are 6 мм и 10 миллиметр.
- Check the holder fit. The catalog lists two four-flute Ø3 mm configurations with a 10 mm length of cut and a 50 мм общая длина. One has a Ø3 mm shank and the other has a Ø4 mm shank.
For other workpiece materials, см. наш general-purpose flat end mills.
CVD Coating and Supply
The CVD diamond coating helps resist abrasive wear when milling graphite. We supply standard catalog sizes and review drawings for custom diamond-coated square end mills. For other end geometries, см. наш CVD diamond-coated end mill range.
Related Technical Guides
- Compare square end, сферический нос, and corner radius geometries in our руководство по выбору концевой фрезы с алмазным покрытием.
- Для графитовых электродов, полости плесени, and recessed features, см. наше руководство по end mill selection for graphite roughing and finishing.
Запросить цену
- Standard sizes. Send the required cutting diameter and quantity. Include any specified length of cut, эффективная длина, общая длина, диаметр хвостовика, и счет флейты. We’ll confirm the catalog configuration before quoting.
- Пользовательские инструменты. Отправить рисунок, sketch, или ключевые размеры, along with the graphite feature to be machined and the quantity. Для встраиваемых функций, include the required reach and any clearance limits.
If you have only partial dimensions, send what you have so we can start the review.
Электронная почта sales@cutterbest.com или send your requirements on WhatsApp for a quote.
Прецизионные фрезы,Режущие инструменты для обработки любого материала с ЧПУ






