Концевая фреза с коническим угловым радиусом

Tapered Corner Radius End Mill Specifications

A tapered corner radius end mill combines three key geometric features: a tapered cutting section, плоский режущий конец, and a defined corner radius between the end and side cutting edges.

This geometry differs from a tapered square end mill, which uses a flat end without a corner radius. It also differs from a tapered ball nose end mill, which uses a fully rounded cutting tip.

The corresponding standard corner-radius end mill series provides reference dimensions for diameter, угловой радиус, длина канавки, диаметр хвостовика, и общая длина. For the tapered version, однако, the required taper angle also affects the final dimensional combination.

Representative reference dimensions include:

These values serve as dimensional references rather than a complete list of tapered-tool combinations. Because the taper angle changes the relationship between the tip diameter, длина резки, and upper cutting diameter, we confirm the final tool geometry from the drawing.

For other tapered cutting geometries, см. наш конические концевые фрезы.

Диаметр наконечника, Corner Radius and Taper Angle Options

Диаметр наконечника, угловой радиус, and taper angle define the main cutting geometry of this tool. Поэтому, buyers should review these dimensions together rather than select them independently.

Tip Diameter and Corner Radius

The corresponding standard corner-radius series provides a reference diameter range of approximately Ø1–20 mm and corner-radius options from R0.2 to R2.0.

Однако, not every diameter uses every radius option. The selected R value must suit both the cutting diameter and the required feature geometry.

A smaller corner radius keeps more of the flat-end geometry. В отличие, a larger R creates a broader transition between the bottom and side cutting edges. По этой причине, the required radius should follow the part drawing or machined feature.

Угол конусности

This product does not use one fixed taper angle across the complete range.

Вместо, we confirm the required taper according to the drawing or machining requirement. When sending a drawing, please also identify whether the stated taper value represents an angle per side or the total included angle.

This information helps us confirm the geometry correctly before quotation and production.

Steel Machining Applications

We supply this series as a standard tool for steel machining.

The tapered cutting section supports angled or tapered sidewalls, while the corner radius creates an R transition between the flat bottom and the side cutting surface.

Кроме того, the final geometry and coating requirement should match the workpiece, рисунок, и состояние обработки. We therefore confirm specific coating requirements during quotation instead of applying one fixed coating specification to every tool.

Варианты конфигурации канавки и инструмента

Four flutes are the standard configuration for the corresponding corner-radius end mill series.

For the tapered version, the final flute geometry depends on the required diameter, угловой радиус, угол конусности, длина канавки, and overall tool design.

If an application requires another configuration, we can review other flute counts according to the drawing. Так же, we confirm coating requirements for each application rather than treating one coating as standard across the complete range.

Приложений

The combination of tapered cutting geometry, a flat end, and a corner radius suits steel-machining features that require both an angled wall and an R transition.

Типичные области применения включают в себя:

• Конические боковины
• Draft-angle features
• Полости пресс-форм
• Tapered profiles
• Flat-bottom features with a corner-radius transition
• Steel components requiring tapered and radius geometry in one tool

The corner-radius geometry distinguishes this tool from a коническая квадратная концевая фреза, which uses a flat end without a corner radius. Тем временем, unlike a коническая концевая фреза со сферическим концом, the center of the cutting end remains flat rather than fully rounded.

For broader guidance on tapered tools and their applications, видеть Применение и выбор конических концевых фрез.

Custom Tapered Corner Radius End Mill Manufacturing

We can manufacture custom tapered corner radius end mills according to customer drawings or dimensional requirements.

Custom parameters can include:

• Диаметр наконечника
• Угловой радиус
• Угол конуса
• Длина канавки
• Диаметр хвостовика
• Габаритная длина
• Количество флейт
• Покрытие
• Other non-standard dimensions

Because the taper angle affects the complete cutting geometry, we use the drawing as the primary reference for a non-standard tool.

Для индивидуальных проектов, clearly identifying the corner radius and taper-angle definition helps us review the geometry before quotation and production.

FAQ About Tapered Corner Radius End Mills

What corner radius options are available?

The corresponding standard corner-radius series provides reference R values from approximately R0.2 to R2.0.

The available radius depends on the tool diameter and complete geometry. Поэтому, we confirm the final combination before production.

Is the taper angle fixed or customizable?

The taper angle is customizable according to the drawing or machining requirement. We do not apply one fixed taper angle across the complete product range.

Для цитаты, please specify whether the taper value represents an angle per side or a total included angle.

What information is needed for a custom tool?

A drawing is the preferred reference for custom tapered geometry.

For technical review, please provide the required tip diameter, угловой радиус, угол конусности, длина резки, диаметр хвостовика, общая длина, и количество.

Can you manufacture a tapered corner radius end mill from a drawing?

Да. We can review and manufacture non-standard tapered corner radius geometry according to customer drawings and machining requirements.

До производства, we confirm the final dimensional combination with the customer.

Send Your Tapered Corner Radius End Mill Inquiry

Send your tapered corner radius end mill inquiry by email at sales@cutterbest.com, или свяжитесь с нами по WhatsApp для рассмотрения спецификации и предложения.