Прецизионные фрезы,Режущие инструменты для обработки любого материала с ЧПУ
When comparing a 60 против 90 против 120 градусная фасочная фреза, start with the angle specified by the drawing or confirmed machining requirement. These options represent different tool specifications rather than a ranking of which one is better.
After confirming the required angle, check the cutter dimensions, материал заготовки, and available product configuration. If a standard option does not match the requirement, OMIST can evaluate non-standard dimensions or other chamfer angle requirements.
60 против 90 против 120 Degree Chamfer Mill Comparison
The table below summarizes the confirmed product information for the three current OMIST chamfer mill series.
| Selection Item | 60° | 90° | 120° |
|---|---|---|---|
| Материал инструмента | Твердый карбид | Твердый карбид | Твердый карбид |
| Конфигурация флейты | 3 Флейты | 2F / 3F Options | 3 Флейты |
| Standard Size Information | Ø3–Ø12 mm | Multiple Sizes / Confirm Requirement | Ø3–Ø12 mm |
| Confirmed Material Information | Чугун / Алюминиевый сплав / Нержавеющая сталь | Сталь / Алюминий | Чугун / Алюминиевый сплав / Нержавеющая сталь |
| Non-Standard Requirement | Evaluation Available | Evaluation Available | Evaluation Available |
Different angles represent different specifications rather than better-or-worse options. The correct choice depends first on the required angle and then on whether the available dimensions and product configuration match the machining requirement.
How to Choose the Right Chamfer Mill Angle
A practical chamfer mill angle selection process starts with the required angle and then checks the dimensions, материал заготовки, and available standard or custom options.
Шаг 1 – Confirm the Required Angle
Start with the part drawing or confirmed machining requirement.
If the requirement specifies 60°, begin with the 60° product series. If it specifies 90° or 120°, check the corresponding series.
Do not select an angle simply because it appears more common or more versatile. The required feature should determine the first step in tool selection.
Шаг 2 – Check the Required Tool Dimensions
Once the angle is known, confirm the main cutter dimensions:
- Диаметр фрезы
- Длина канавки
- Диаметр хвостовика
- Общая длина
For a standard product, compare these dimensions with the available size information on the relevant product page.
If the required dimensions are not listed, provide the dimensions you already know so OMIST can evaluate whether a non-standard tool is required.
Шаг 3 – Confirm the Workpiece Material
Check the workpiece material against the information confirmed for the relevant product series rather than assuming that every angle uses the same material configuration.
The confirmed 60° and 120° standard series list Cast Iron, Алюминиевый сплав, и нержавеющая сталь. The current 90° series has confirmed versions for Steel and Aluminum.
If your workpiece material is not covered by the listed information, provide the material details with the inquiry for evaluation.
Шаг 4 – Select a Standard Option or Request Custom Evaluation
If a standard angle and size match the requirement, continue to the relevant product page to confirm the available specification.
If the standard product does not match, OMIST can evaluate a custom requirement. Useful inquiry information includes:
- Требуемый угол
- Available cutter dimensions
- Материал заготовки
- Количество
- Drawing or dimensional sketch, если доступно
A drawing is helpful but not required for the first inquiry. You can send the available dimensions or dimensional sketch for review.
When to Choose a 60 Градусная фасочная фреза
The standard series includes Ø3–Ø12 mm solid carbide, straight-flute, 3-варианты флейты. Review the listed dimensions and material information on the 60 Градусная фасочная фреза страница продукта; non-standard dimensions can also be evaluated.
When to Choose a 90 Градусная фасочная фреза
The current product series includes solid carbide 2F and 3F options, with Steel and Aluminum versions and multiple size options. Confirm the required specification on the 90 Градусная фасочная фреза product page or provide non-standard dimensions for evaluation.
When to Choose a 120 Градусная фасочная фреза
The standard series includes Ø3–Ø12 mm solid carbide, straight-flute, 3-варианты флейты. Review the listed dimensions and material information on the 120 Градусная фасочная фреза страница продукта; non-standard dimensions can also be evaluated.
Вопросы и ответы
How do I choose the correct chamfer mill angle?
Start with the angle specified by the drawing or confirmed machining requirement. Then check the cutter dimensions, материал заготовки, and available product configuration before selecting a standard or custom option.
Does the chamfer mill angle need to match the drawing?
If the drawing specifies a chamfer angle, use that requirement as the basis for tool selection.
If the drawing information is incomplete, provide the available dimensions and machining requirement for evaluation.
Can OMIST evaluate custom chamfer angles or dimensions?
Да. OMIST can evaluate non-standard dimensions and other chamfer angle requirements.
Provide the available angle, cutter dimensions, материал заготовки, количество, and a drawing or dimensional sketch if available.
Explore Chamfer Mills
For standard options, review the relevant 60°, 90°, or 120° product series above.
You can also browse the complete фасочные фрезы range for available product options.
For a non-standard requirement, send OMIST the available angle, размеры, материал заготовки, количество, and a drawing or dimensional sketch if available to sales@cutterbest.com for evaluation and quotation.